# Quansheng UV-K5 driver (c) 2023 Jacek Lipkowski # Adapted For UV-K5 EGZUMER custom software By EGZUMER, JOC2 # Re-Adapted For UV-K5 EGZUMER/F4HWN custom software By JOC2 # # based on template.py Copyright 2012 Dan Smith # # # This is a preliminary version of a driver for the UV-K5 # It is based on my reverse engineering effort described here: # https://github.com/sq5bpf/uvk5-reverse-engineering # # Warning: this driver is experimental, it may brick your radio, # eat your lunch and mess up your configuration. # # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # change/ modification # # 2024-02-09 :section password has been commented, because the new chirp give error with int. # 2024-02-18 : a bug fix has been remove, that seem not work under mac os.. under investigation.. # search for (bugfix calibration) # #3.1.0: unknow bit change for specify name # add web link # explain how the change chirp language # add User, low1 to low5 to the power level # AM fix message information this has not change # update info how to change language in chirp # rename set_low to set pwr # add the 3500ma battery selection #3.2.0: # add web link in firmware # add tx lock in all channel # update link pdf for the 3.1 pdf instead of 3.0 #3.3.0: # new Setting_set_tmr # update link pdf for the 3.3 # update some info in the help section #3.4.0: # remove tx250 tx350 tx500 Setting has firmware not use it any more # add the SetOff to turn off the radio # change ScnRev 24/67 (Scan Resume Mode) to follow firmware # update link pdf for the 3.4 # Add 2 more youtube link import webbrowser import os import struct import logging import wx from chirp import chirp_common, directory, bitwise, memmap, errors, util from chirp.settings import RadioSetting, RadioSettingGroup, \ RadioSettingValueBoolean, RadioSettingValueList, \ RadioSettingValueInteger, RadioSettingValueString, \ RadioSettings, InvalidValueError LOG = logging.getLogger(__name__) # Show the obfuscated version of commands. Not needed normally, but # might be useful for someone who is debugging a similar radio DEBUG_SHOW_OBFUSCATED_COMMANDS = False # Show the memory being written/received. Not needed normally, because # this is the same information as in the packet hexdumps, but # might be useful for someone debugging some obscure memory issue DEBUG_SHOW_MEMORY_ACTIONS = False # TODO: remove the driver version when it's in mainline chirp DRIVER_VERSION = "Quansheng UV-K5/K6/5R driver ver: 2024/10/03 (c) EGZUMER + F4HWN v3.4.0" FIRMWARE_VERSION_UPDATE = "https://github.com/armel/uv-k5-firmware-custom/releases" CHIRP_DRIVER_VERSION_UPDATE = "https://github.com/armel/uv-k5-chirp-driver/releases" CHAINE_F4HWN = "https://www.youtube.com/@f4hwn" PDF_FILE_ALAIN_UPDATE = "https://www.dropbox.com/scl/fi/hcitzq5anpbho7vreyil4/MENU-FIRMWARE-F4HWN-v3.4.pdf?rlkey=k1x4mnlrvyod2brxolhxh070f&e=1&dl=0" PDF_FILE_QUICK_KEY = "https://github.com/armel/uv-k5-chirp-driver/blob/main/20240530%20Quick%20Keys%20F4HWNv%202.x.pdf" YOUTUBE_INFO_FUNKWELLE = "https://www.youtube.com/watch?v=4xj0-VUe5aE" YOUTUBE_INFO_M7FRS = "https://www.youtube.com/watch?v=duNB2xS208E" YOUTUBE_INFO_PU4BLA = "https://www.youtube.com/watch?v=AEFwfQUq8YY" YOUTUBE_INFO_R3MDG = "https://www.youtube.com/watch?v=DFMYwTIOUxk" YOUTUBE_INFO_HA8CSY_HUNGARIA = "https://www.youtube.com/watch?v=SgmvDUiHWqA&ab_channel=HA8CSY" YOUTUBE_INFO_PY2MAJ_BRAZIL = "https://www.youtube.com/watch?v=jJAeJ5SX3hs&ab_channel=PY2MAJVIDEOS" VALEUR_COMPILER = "ENABLE" MEM_FORMAT = """ //#seekto 0x0000; struct { ul32 freq; ul32 offset; // 0x08 u8 rxcode; u8 txcode; // 0x0A u8 txcodeflag:4, rxcodeflag:4; // 0x0B u8 modulation:4, offsetDir:4; // 0x0C u8 __UNUSED1:1, txLock:1, busyChLockout:1, txpower:3, bandwidth:1, freq_reverse:1; // 0x0D u8 __UNUSED2:4, dtmf_pttid:3, dtmf_decode:1; // 0x0E u8 step; u8 scrambler; } channel[214]; //#seekto 0xd60; struct { u8 is_scanlistx:3, compander:2, band:3; } ch_attr[207]; #seekto 0xe40; ul16 fmfreq[20]; #seekto 0xe70; u8 call_channel; u8 squelch; u8 max_talk_time; u8 noaa_autoscan; u8 key_lock; u8 vox_switch; u8 vox_level; u8 mic_gain; u8 backlight_min:4, backlight_max:4; u8 channel_display_mode; u8 crossband; u8 battery_save; u8 dual_watch; u8 backlight_time; u8 ste; u8 freq_mode_allowed; #seekto 0xe80; u8 ScreenChannel_A; u8 MrChannel_A; u8 FreqChannel_A; u8 ScreenChannel_B; u8 MrChannel_B; u8 FreqChannel_B; u8 NoaaChannel_A; u8 NoaaChannel_B; #seekto 0xe90; u8 keyM_longpress_action:7, button_beep:1; u8 key1_shortpress_action; u8 key1_longpress_action; u8 key2_shortpress_action; u8 key2_longpress_action; u8 scan_resume_mode; u8 auto_keypad_lock; u8 power_on_dispmode; ul32 password; #seekto 0xea0; u8 voice; u8 s0_level; u8 s9_level; #seekto 0xea8; u8 alarm_mode; u8 roger_beep; u8 rp_ste; u8 TX_VFO; u8 Battery_type; #seekto 0xeb0; char logo_line1[16]; char logo_line2[16]; //#seekto 0xed0; struct { u8 side_tone; char separate_code; char group_call_code; u8 decode_response; u8 auto_reset_time; u8 preload_time; u8 first_code_persist_time; u8 hash_persist_time; u8 code_persist_time; u8 code_interval_time; u8 permit_remote_kill; #seekto 0xee0; char local_code[3]; #seek 5; char kill_code[5]; #seek 3; char revive_code[5]; #seek 3; char up_code[16]; char down_code[16]; } dtmf; //#seekto 0xf18; u8 slDef; u8 unknown_0xf19:5, sl3PriorEnab:1, sl2PriorEnab:1, sl1PriorEnab:1; u8 sl1PriorCh1; u8 sl1PriorCh2; u8 sl2PriorCh1; u8 sl2PriorCh2; u8 sl3PriorCh1; u8 sl3PriorCh2; #seekto 0xf40; u8 int_flock; u8 int_350tx_unsused; u8 int_KILLED; u8 int_200tx_unsused; u8 int_500tx_unsused; u8 int_350en; u8 int_scren; u8 backlight_on_TX_RX:2, AM_fix:1, mic_bar:1, battery_text:2, live_DTMF_decoder:1, unknown_0xf47:1; #seekto 0xf50; struct { char name[16]; } channelname[200]; #seekto 0x1c00; struct { char name[8]; char number[3]; #seek 5; } dtmfcontact[16]; struct { struct { #seekto 0x1E00; u8 openRssiThr[10]; #seekto 0x1E10; u8 closeRssiThr[10]; #seekto 0x1E20; u8 openNoiseThr[10]; #seekto 0x1E30; u8 closeNoiseThr[10]; #seekto 0x1E40; u8 closeGlitchThr[10]; #seekto 0x1E50; u8 openGlitchThr[10]; } sqlBand4_7; struct { #seekto 0x1E60; u8 openRssiThr[10]; #seekto 0x1E70; u8 closeRssiThr[10]; #seekto 0x1E80; u8 openNoiseThr[10]; #seekto 0x1E90; u8 closeNoiseThr[10]; #seekto 0x1EA0; u8 closeGlitchThr[10]; #seekto 0x1EB0; u8 openGlitchThr[10]; } sqlBand1_3; #seekto 0x1EC0; struct { ul16 level1; ul16 level2; ul16 level4; ul16 level6; } rssiLevelsBands3_7; struct { ul16 level1; ul16 level2; ul16 level4; ul16 level6; } rssiLevelsBands1_2; struct { struct { u8 lower; u8 center; u8 upper; } low; struct { u8 lower; u8 center; u8 upper; } mid; struct { u8 lower; u8 center; u8 upper; } hi; #seek 7; } txp[7]; #seekto 0x1F40; ul16 batLvl[6]; #seekto 0x1F50; ul16 vox1Thr[10]; #seekto 0x1F68; ul16 vox0Thr[10]; #seekto 0x1F80; u8 micLevel[5]; #seekto 0x1F88; il16 xtalFreqLow; #seekto 0x1F8E; u8 volumeGain; u8 dacGain; } cal; #seekto 0x1FF0; struct { u8 ENABLE_DTMF_CALLING:1, ENABLE_PWRON_PASSWORD:1, ENABLE_TX1750:1, ENABLE_ALARM:1, ENABLE_VOX:1, ENABLE_VOICE:1, ENABLE_NOAA:1, ENABLE_FMRADIO:1; u8 __UNUSED:2, ENABLE_BANDSCOPE:1, ENABLE_AM_FIX:1, ENABLE_BLMIN_TMP_OFF:1, ENABLE_RAW_DEMODULATORS:1, ENABLE_WIDE_RX:1, ENABLE_FLASHLIGHT:1; } BUILD_OPTIONS; #seekto 0x1FF2; u8 eeprom0x1ff2; u8 eeprom0x1ff3; u8 set_off_tmr:7, set_tmr:1; u8 set_gui:1, set_met:1, set_lck:1, set_inv:1, set_contrast:4; u8 set_tot:4, set_eot:4; u8 set_pwr:4, set_ptt:4; u8 eeprom0x1ff8; u8 eeprom0x1ff9; u8 eeprom0x1ffa; u8 eeprom0x1ffb; u8 eeprom0x1ffc; u8 eeprom0x1ffd; u8 eeprom0x1ffe; u8 eeprom0x1fff; """ # flags1 FLAGS1_OFFSET_NONE = 0b00 FLAGS1_OFFSET_MINUS = 0b10 FLAGS1_OFFSET_PLUS = 0b01 POWER_HIGH = 0b111 POWER_MEDIUM = 0b110 POWER_LOW5 = 0b101 POWER_LOW4 = 0b100 POWER_LOW3 = 0b011 POWER_LOW2 = 0b010 POWER_LOW1 = 0b001 POWER_USER = 0b000 # SET_LOW_POWER f4hwn SET_LOW_LIST = [ "< 20mW", "125mW", "250mW", "500mW", "1W", "2W", "5W"] # SET_PTT f4hwn SET_PTT_LIST = ["CLASSIC", "ONEPUSH"] # SET_TOT and SET_EOT f4hwn SET_TOT_EOT_LIST = ["OFF", "SOUND", "VISUAL", "ALL"] # SET_OFF_ON f4hwn SET_OFF_ON_LIST = ["OFF", "ON"] # SET_lck f4hwn SET_LCK_LIST = ["KEYS", "KEYS+PTT"] # SET_MET SET_GUI f4hwn SET_MET_LIST = ["TINY", "CLASSIC"] # dtmf_flags PTTID_LIST = ["OFF", "UP CODE", "DOWN CODE", "UP+DOWN CODE", "APOLLO QUINDAR"] # power UVK5_POWER_LEVELS = [chirp_common.PowerLevel("USER = < 20mW to 5W", watts=0.000), chirp_common.PowerLevel("LOW 1 = < 20mW", watts=0.020), chirp_common.PowerLevel("LOW 2 = 125mW", watts=0.125), chirp_common.PowerLevel("LOW 3 = 250mW", watts=0.250), chirp_common.PowerLevel("LOW 4 = 500mW", watts=0.500), chirp_common.PowerLevel("LOW 5 = 1W", watts=1.00), chirp_common.PowerLevel("MID = 2W", watts=2.00), chirp_common.PowerLevel("HIGH = 5W", watts=5.00), ] # scrambler SCRAMBLER_LIST = ["OFF", "2600Hz", "2700Hz", "2800Hz", "2900Hz", "3000Hz", "3100Hz", "3200Hz", "3300Hz", "3400Hz", "3500Hz"] # compander COMPANDER_LIST = ["OFF", "TX", "RX", "TX/RX"] # rx mode RXMODE_LIST = ["MAIN ONLY", "DUAL RX RESPOND", "CROSS BAND", "MAIN TX DUAL RX"] # channel display mode CHANNELDISP_LIST = ["Frequency (FREQ)", "CHANNEL NUMBER", "NAME", "Name + Frequency (NAME + FREQ)"] # TalkTime TALK_TIME_LIST = ["N/U", "N/U", "N/U", "N/U", "N/U", "30 sec", "35 sec", "40 sec", "45 sec", "50 sec", "55 sec", "1 min", "1 min : 5 sec", "1 min : 10 sec", "1 min : 15 sec", "1 min : 20 sec", "1 min : 25 sec", "1 min : 30 sec", "1 min : 35 sec", "1 min : 40 sec", "1 min : 45 sec", "1 min : 50 sec", "1 min : 55 sec", "2 min", "2 min : 5 sec", "2 min : 10 sec", "2 min : 15 sec", "2 min : 20 sec", "2 min : 25 sec", "2 min : 30 sec", "2 min : 35 sec", "2 min : 40 sec", "2 min : 45 sec", "2 min : 50 sec", "2 min : 55 sec", "3 min", "3 min : 5 sec", "3 min : 10 sec", "3 min : 15 sec", "3 min : 20 sec", "3 min : 25 sec", "3 min : 30 sec", "3 min : 35 sec", "3 min : 40 sec", "3 min : 45 sec", "3 min : 50 sec", "3 min : 55 sec", "4 min", "4 min : 5 sec", "4 min : 10 sec", "4 min : 15 sec", "4 min : 20 sec", "4 min : 25 sec", "4 min : 30 sec", "4 min : 35 sec", "4 min : 40 sec", "4 min : 45 sec", "4 min : 50 sec", "4 min : 55 sec", "5 min", "5 min : 5 sec", "5 min : 10 sec", "5 min : 15 sec", "5 min : 20 sec", "5 min : 25 sec", "5 min : 30 sec", "5 min : 35 sec", "5 min : 40 sec", "5 min : 45 sec", "5 min : 50 sec", "5 min : 55 sec", "6 min", "6 min : 5 sec", "6 min : 10 sec", "6 min : 15 sec", "6 min : 20 sec", "6 min : 25 sec", "6 min : 30 sec", "6 min : 35 sec", "6 min : 40 sec", "6 min : 45 sec", "6 min : 50 sec", "6 min : 55 sec", "7 min", "7 min : 5 sec", "7 min : 10 sec", "7 min : 15 sec", "7 min : 20 sec", "7 min : 25 sec", "7 min : 30 sec", "7 min : 35 sec", "7 min : 40 sec", "7 min : 45 sec", "7 min : 50 sec", "7 min : 55 sec", "8 min", "8 min : 5 sec", "8 min : 10 sec", "8 min : 15 sec", "8 min : 20 sec", "8 min : 25 sec", "8 min : 30 sec", "8 min : 35 sec", "8 min : 40 sec", "8 min : 45 sec", "8 min : 50 sec", "8 min : 55 sec", "9 min", "9 min : 5 sec", "9 min : 10 sec", "9 min : 15 sec", "9 min : 20 sec", "9 min : 25 sec", "9 min : 30 sec", "9 min : 35 sec", "9 min : 40 sec", "9 min : 45 sec", "9 min : 50 sec", "9 min : 55 sec", "10 min", "10 min : 5 sec", "10 min : 10 sec", "10 min : 15 sec", "10 min : 20 sec", "10 min : 25 sec", "10 min : 30 sec", "10 min : 35 sec", "10 min : 40 sec", "10 min : 45 sec", "10 min : 50 sec", "10 min : 55 sec", "11 min", "11 min : 5 sec", "11 min : 10 sec", "11 min : 15 sec", "11 min : 20 sec", "11 min : 25 sec", "11 min : 30 sec", "11 min : 35 sec", "11 min : 40 sec", "11 min : 45 sec", "11 min : 50 sec", "11 min : 55 sec", "12 min", "12 min : 5 sec", "12 min : 10 sec", "12 min : 15 sec", "12 min : 20 sec", "12 min : 25 sec", "12 min : 30 sec", "12 min : 35 sec", "12 min : 40 sec", "12 min : 45 sec", "12 min : 50 sec", "12 min : 55 sec", "13 min", "13 min : 5 sec", "13 min : 10 sec", "13 min : 15 sec", "13 min : 20 sec", "13 min : 25 sec", "13 min : 30 sec", "13 min : 35 sec", "13 min : 40 sec", "13 min : 45 sec", "13 min : 50 sec", "13 min : 55 sec", "14 min", "14 min : 5 sec", "14 min : 10 sec", "14 min : 15 sec", "14 min : 20 sec", "14 min : 25 sec", "14 min : 30 sec", "14 min : 35 sec", "14 min : 40 sec", "14 min : 45 sec", "14 min : 50 sec", "14 min : 55 sec", "15 min"] # Set Off timer SET_OFF_TMR_LIST = ["OFF", "00h:01m", "00h:02m", "00h:03m", "00h:04m", "00h:05m", "00h:06m", "00h:07m", "00h:08m", "00h:09m", "00h:10m", "00h:11m", "00h:12m", "00h:13m", "00h:14m", "00h:15m", "00h:16m", "00h:17m", "00h:18m", "00h:19m", "00h:20m", "00h:21m", "00h:22m", "00h:23m", "00h:24m", "00h:25m", "00h:26m", "00h:27m", "00h:28m", "00h:29m", "00h:30m", "00h:31m", "00h:32m", "00h:33m", "00h:34m", "00h:35m", "00h:36m", "00h:37m", "00h:38m", "00h:39m", "00h:40m", "00h:41m", "00h:42m", "00h:43m", "00h:44m", "00h:45m", "00h:46m", "00h:47m", "00h:48m", "00h:49m", "00h:50m", "00h:51m", "00h:52m", "00h:53m", "00h:54m", "00h:55m", "00h:56m", "00h:57m", "00h:58m", "00h:59m", "01h:00m", "01h:01m", "01h:02m", "01h:03m", "01h:04m", "01h:05m", "01h:06m", "01h:07m", "01h:08m", "01h:09m", "01h:10m", "01h:11m", "01h:12m", "01h:13m", "01h:14m", "01h:15m", "01h:16m", "01h:17m", "01h:18m", "01h:19m", "01h:20m", "01h:21m", "01h:22m", "01h:23m", "01h:24m", "01h:25m", "01h:26m", "01h:27m", "01h:28m", "01h:29m", "01h:30m", "01h:31m", "01h:32m", "01h:33m", "01h:34m", "01h:35m", "01h:36m", "01h:37m", "01h:38m", "01h:39m", "01h:40m", "01h:41m", "01h:42m", "01h:43m", "01h:44m", "01h:45m", "01h:46m", "01h:47m", "01h:48m", "01h:49m", "01h:50m", "01h:51m", "01h:52m", "01h:53m", "01h:54m", "01h:55m", "01h:56m", "01h:57m", "01h:58m", "01h:59m", "02h:00m"] # Auto Keypad Lock AUTO_KEYPAD_LOCK_LIST = ["OFF", "AUTO"] # battery save BATSAVE_LIST = ["OFF", "1:1", "1:2", "1:3", "1:4"] # battery type BATTYPE_LIST = ["1600 mAh", "2200 mAh", "3500 mAh"] # bat txt BAT_TXT_LIST = ["NONE", "VOLTAGE", "PERCENT"] # Backlight auto mode BACKLIGHT_LIST = ["OFF", "5 sec", "10 sec", "15 sec", "20 sec", "25 sec", "30 sec", "35 sec", "40 sec", "45 sec", "50 sec", "55 sec", "1 min", "1 min : 5 sec", "1 min : 10 sec", "1 min : 15 sec", "1 min : 20 sec", "1 min : 25 sec", "1 min : 30 sec", "1 min : 35 sec", "1 min : 40 sec", "1 min : 45 sec", "1 min : 50 sec", "1 min : 55 sec", "2 min", "2 min : 5 sec", "2 min : 10 sec", "2 min : 15 sec", "2 min : 20 sec", "2 min : 25 sec", "2 min : 30 sec", "2 min : 35 sec", "2 min : 40 sec", "2 min : 45 sec", "2 min : 50 sec", "2 min : 55 sec", "3 min", "3 min : 5 sec", "3 min : 10 sec", "3 min : 15 sec", "3 min : 20 sec", "3 min : 25 sec", "3 min : 30 sec", "3 min : 35 sec", "3 min : 40 sec", "3 min : 45 sec", "3 min : 50 sec", "3 min : 55 sec", "4 min", "4 min : 5 sec", "4 min : 10 sec", "4 min : 15 sec", "4 min : 20 sec", "4 min : 25 sec", "4 min : 30 sec", "4 min : 35 sec", "4 min : 40 sec", "4 min : 45 sec", "4 min : 50 sec", "4 min : 55 sec", "5 min", "Always On (ON)"] # Backlight LVL BACKLIGHT_LVL_LIST = ["0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10"] # Backlight _TX_RX_LIST BACKLIGHT_TX_RX_LIST = ["OFF", "TX", "RX", "TX/RX"] # steps TODO: change order STEPS = [2.5, 5, 6.25, 10, 12.5, 25, 8.33, 0.01, 0.05, 0.1, 0.25, 0.5, 1, 1.25, 9, 15, 20, 30, 50, 100, 125, 200, 250, 500] # ctcss/dcs codes TMODES = ["", "Tone", "DTCS", "DTCS"] TONE_NONE = 0 TONE_CTCSS = 1 TONE_DCS = 2 TONE_RDCS = 3 CTCSS_TONES = [ 67.0, 69.3, 71.9, 74.4, 77.0, 79.7, 82.5, 85.4, 88.5, 91.5, 94.8, 97.4, 100.0, 103.5, 107.2, 110.9, 114.8, 118.8, 123.0, 127.3, 131.8, 136.5, 141.3, 146.2, 151.4, 156.7, 159.8, 162.2, 165.5, 167.9, 171.3, 173.8, 177.3, 179.9, 183.5, 186.2, 189.9, 192.8, 196.6, 199.5, 203.5, 206.5, 210.7, 218.1, 225.7, 229.1, 233.6, 241.8, 250.3, 254.1 ] # lifted from ft4.py DTCS_CODES = [ # TODO: add negative codes 23, 25, 26, 31, 32, 36, 43, 47, 51, 53, 54, 65, 71, 72, 73, 74, 114, 115, 116, 122, 125, 131, 132, 134, 143, 145, 152, 155, 156, 162, 165, 172, 174, 205, 212, 223, 225, 226, 243, 244, 245, 246, 251, 252, 255, 261, 263, 265, 266, 271, 274, 306, 311, 315, 325, 331, 332, 343, 346, 351, 356, 364, 365, 371, 411, 412, 413, 423, 431, 432, 445, 446, 452, 454, 455, 462, 464, 465, 466, 503, 506, 516, 523, 526, 532, 546, 565, 606, 612, 624, 627, 631, 632, 654, 662, 664, 703, 712, 723, 731, 732, 734, 743, 754 ] # flock list extended FLOCK_LIST = ["DEFAULT+ (137-174, 400-470)", "FCC HAM (144-148, 420-450)", "CA HAM (144-148, 430-450)", "CE HAM (144-146, 430-440)", "GB HAM (144-148, 430-440)", "137-174, 400-430", "137-174, 400-438", "DISABLE ALL", "UNLOCK ALL"] SCANRESUME_LIST = ["CARRIER FAST : Listen 100 milisecond until the signal disappears ", "CARRIER SLOW : Listen 2.5 second until the signal disappears ", "STOP : Stop scan when a signal is received ", "TIMEOUT 00m:05s : Listen for this time and resume ", "TIMEOUT 00m:10s : Listen for this time and resume ", "TIMEOUT 00m:15s : Listen for this time and resume ", "TIMEOUT 00m:20s : Listen for this time and resume ", "TIMEOUT 00m:25s : Listen for this time and resume ", "TIMEOUT 00m:30s : Listen for this time and resume ", "TIMEOUT 00m:35s : Listen for this time and resume ", "TIMEOUT 00m:40s : Listen for this time and resume ", "TIMEOUT 00m:45s : Listen for this time and resume ", "TIMEOUT 00m:50s : Listen for this time and resume ", "TIMEOUT 00m:55s : Listen for this time and resume ", "TIMEOUT 01m:00s : Listen for this time and resume ", "TIMEOUT 01m:05s : Listen for this time and resume ", "TIMEOUT 01m:10s : Listen for this time and resume ", "TIMEOUT 01m:15s : Listen for this time and resume ", "TIMEOUT 01m:20s : Listen for this time and resume ", "TIMEOUT 01m:25s : Listen for this time and resume ", "TIMEOUT 01m:30s : Listen for this time and resume ", "TIMEOUT 01m:35s : Listen for this time and resume ", "TIMEOUT 01m:40s : Listen for this time and resume ", "TIMEOUT 01m:45s : Listen for this time and resume ", "TIMEOUT 01m:50s : Listen for this time and resume ", "TIMEOUT 01m:55s : Listen for this time and resume ", "TIMEOUT 02m:00s : Listen for this time and resume "] WELCOME_LIST = ["Message line 1, Voltage, Sound (ALL)", "Make 2 short sounds (SOUND)", "User message line 1 and line 2 (MESSAGE)", "Battery voltage (VOLTAGE)", "NONE"] VOICE_LIST = ["OFF", "Chinese", "English"] # ACTIVE CHANNEL TX_VFO_LIST = ["A", "B"] ALARMMODE_LIST = ["SITE", "TONE"] ROGER_LIST = ["OFF", "Roger beep (ROGER)", "MDC data burst (MDC)"] RTE_LIST = ["OFF", "100ms", "200ms", "300ms", "400ms", "500ms", "600ms", "700ms", "800ms", "900ms", "1000ms"] VOX_LIST = ["OFF", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10"] MEM_SIZE = 0x2000 # size of all memory PROG_SIZE = 0x1d00 # size of the memory that we will write MEM_BLOCK = 0x80 # largest block of memory that we can reliably write CAL_START = 0x1E00 # calibration memory start address F4HWN_START =0x1FF2 # calibration F4HWN memory start address # fm radio supported frequencies FMMIN = 76.0 FMMAX = 108.0 # bands supported by the UV-K5 BANDS_STANDARD = { 0: [50.0, 76.0], 1: [108.0, 136.9999], 2: [137.0, 173.9999], 3: [174.0, 349.9999], 4: [350.0, 399.9999], 5: [400.0, 469.9999], 6: [470.0, 600.0] } BANDS_WIDE = { 0: [18.0, 108.0], 1: [108.0, 136.9999], 2: [137.0, 173.9999], 3: [174.0, 349.9999], 4: [350.0, 399.9999], 5: [400.0, 469.9999], 6: [470.0, 1300.0] } SCANLIST_LIST = ["None ", "List [1]", "List [2]", "List [1, 2]", "List [3]", "List [1, 3]", "List [2, 3]", "All List [1, 2, 3]"] SCANLIST_SELECT_LIST = ["LIST [0] NO LIST ", "LIST [1]", "LIST [2]", "LIST [3]", "LISTS [1, 2, 3]", "All Channel (ALL)"] DTMF_CHARS = "0123456789ABCD*# " DTMF_CHARS_ID = "0123456789ABCDabcd" DTMF_CHARS_KILL = "0123456789ABCDabcd" DTMF_CHARS_UPDOWN = "0123456789ABCDabcd#* " DTMF_CODE_CHARS = "ABCD*# " DTMF_DECODE_RESPONSE_LIST = ["DO NOTHING", "Local ringing (RING)", "Replay response (REPLY)", "Local ringing + reply response (BOTH)"] KEYACTIONS_LIST = ["NONE", "FLASHLIGHT", "POWER", "MONITOR", "SCAN", "Voice detection (VOX)", "ALARM", "FM RADIO", "1750Hz TONE", "LOCK KEYPAD", "Main VFO (VFO A / VFO B)", "Frequency/memory mode (VFO / MEM)", "MODE", "Put the backlight OFF temporarily (BL_MIN_TMP_OFF)", "Change RxMode: *Main only,*Dual RX,*Cross Band,*TX Dual RX (RX MODE)", "MAIN ONLY", "Toggle CLASSIC to ONE PUSH ptt (PTT)", "WIDE / NARROW" ] MIC_GAIN_LIST = ["+1.1dB", "+4.0dB", "+8.0dB", "+12.0dB", "+15.1dB"] def xorarr(data: bytes): """the communication is obfuscated using this fine mechanism""" tbl = [22, 108, 20, 230, 46, 145, 13, 64, 33, 53, 213, 64, 19, 3, 233, 128] ret = b"" idx = 0 for byte in data: ret += bytes([byte ^ tbl[idx]]) idx = (idx+1) % len(tbl) return ret def calculate_crc16_xmodem(data: bytes): """ if this crc was used for communication to AND from the radio, then it would be a measure to increase reliability. but it's only used towards the radio, so it's for further obfuscation """ poly = 0x1021 crc = 0x0 for byte in data: crc = crc ^ (byte << 8) for _ in range(8): crc = crc << 1 if crc & 0x10000: crc = (crc ^ poly) & 0xFFFF return crc & 0xFFFF def _send_command(serport, data: bytes): """Send a command to UV-K5 radio""" LOG.debug("Sending command (unobfuscated) len=0x%4.4x:\n%s", len(data), util.hexprint(data)) crc = calculate_crc16_xmodem(data) data2 = data + struct.pack("HBB", 0xabcd, len(data), 0) + \ xorarr(data2) + \ struct.pack(">H", 0xdcba) if DEBUG_SHOW_OBFUSCATED_COMMANDS: LOG.debug("Sending command (obfuscated):\n%s", util.hexprint(command)) try: result = serport.write(command) except Exception as e: raise errors.RadioError("Error writing data to radio") from e return result def _receive_reply(serport): header = serport.read(4) if len(header) != 4: LOG.warning("Header short read: [%s] len=%i", util.hexprint(header), len(header)) raise errors.RadioError("Header short read") if header[0] != 0xAB or header[1] != 0xCD or header[3] != 0x00: LOG.warning("Bad response header: %s len=%i", util.hexprint(header), len(header)) raise errors.RadioError("Bad response header") cmd = serport.read(int(header[2])) if len(cmd) != int(header[2]): LOG.warning("Body short read: [%s] len=%i", util.hexprint(cmd), len(cmd)) raise errors.RadioError("Command body short read") footer = serport.read(4) if len(footer) != 4: LOG.warning("Footer short read: [%s] len=%i", util.hexprint(footer), len(footer)) raise errors.RadioError("Footer short read") if footer[2] != 0xDC or footer[3] != 0xBA: LOG.debug("Reply before bad response footer (obfuscated)" "len=0x%4.4x:\n%s", len(cmd), util.hexprint(cmd)) LOG.warning("Bad response footer: %s len=%i", util.hexprint(footer), len(footer)) raise errors.RadioError("Bad response footer") if DEBUG_SHOW_OBFUSCATED_COMMANDS: LOG.debug("Received reply (obfuscated) len=0x%4.4x:\n%s", len(cmd), util.hexprint(cmd)) cmd2 = xorarr(cmd) LOG.debug("Received reply (unobfuscated) len=0x%4.4x:\n%s", len(cmd2), util.hexprint(cmd2)) return cmd2 def _getstring(data: bytes, begin, maxlen): tmplen = min(maxlen+1, len(data)) ss = [data[i] for i in range(begin, tmplen)] key = 0 for key, val in enumerate(ss): if val < ord(' ') or val > ord('~'): return ''.join(chr(x) for x in ss[0:key]) return '' def _sayhello(serport): hellopacket = b"\x14\x05\x04\x00\x6a\x39\x57\x64" tries = 5 while True: LOG.debug("Sending hello packet") _send_command(serport, hellopacket) rep = _receive_reply(serport) if rep: break tries -= 1 if tries == 0: LOG.warning("Failed to initialise radio") raise errors.RadioError("Failed to initialize radio") if rep.startswith(b'\x18\x05'): raise errors.RadioError("Radio is in programming mode, " "restart radio into normal mode") firmware = _getstring(rep, 4, 24) LOG.info("Found firmware: %s", firmware) return firmware def _readmem(serport, offset, length): LOG.debug("Sending readmem offset=0x%4.4x len=0x%4.4x", offset, length) readmem = b"\x1b\x05\x08\x00" + \ struct.pack("> 8) & 0xff): return True LOG.warning("Bad data from writemem") raise errors.RadioError("Bad response to writemem") def _resetradio(serport): resetpacket = b"\xdd\x05\x00\x00" _send_command(serport, resetpacket) def do_download(radio): """download eeprom from radio""" serport = radio.pipe serport.timeout = 0.5 status = chirp_common.Status() status.cur = 0 status.max = MEM_SIZE status.msg = "Downloading from radio" radio.status_fn(status) eeprom = b"" f = _sayhello(serport) if f: radio.FIRMWARE_VERSION = f else: raise errors.RadioError("Failed to initialize radio") addr = 0 while addr < MEM_SIZE: data = _readmem(serport, addr, MEM_BLOCK) status.cur = addr radio.status_fn(status) if data and len(data) == MEM_BLOCK: eeprom += data addr += MEM_BLOCK else: raise errors.RadioError("Memory download incomplete") return memmap.MemoryMapBytes(eeprom) def do_upload(radio): """upload configuration to radio eeprom""" serport = radio.pipe serport.timeout = 0.5 status = chirp_common.Status() status.cur = 0 status.msg = "Uploading to radio" if radio.upload_f4hwn: status.max = MEM_SIZE-F4HWN_START start_addr = F4HWN_START stop_addr = MEM_SIZE else: if radio.upload_calibration: status.max = F4HWN_START-CAL_START start_addr = CAL_START stop_addr = F4HWN_START else: status.max = PROG_SIZE start_addr = 0 stop_addr = PROG_SIZE radio.status_fn(status) f = _sayhello(serport) if f: radio.FIRMWARE_VERSION = f else: return False addr = start_addr while addr < stop_addr: dat = radio.get_mmap()[addr:addr+MEM_BLOCK] _writemem(serport, dat, addr) status.cur = addr - start_addr radio.status_fn(status) if dat: addr += MEM_BLOCK else: raise errors.RadioError("Memory upload incomplete") status.msg = "Uploaded OK" _resetradio(serport) return True def min_max_def(value, min_val, max_val, default): """returns value if in bounds or default otherwise""" if min_val is not None and value < min_val: return default if max_val is not None and value > max_val: return default return value def list_def(value, lst, default): """return value if is in the list, default otherwise""" if isinstance(default, str): default = lst.index(default) if value < 0 or value >= len(lst): return default return value @directory.register class UVK5RadioEgzumer(chirp_common.CloneModeRadio): """Quansheng UV-K5 (egzumer + f4hwn)""" VENDOR = "Quansheng" MODEL = "UV-K5 (egzumer + f4hwn)" BAUD_RATE = 38400 NEEDS_COMPAT_SERIAL = False FIRMWARE_VERSION = "" # this change to send power level chan in the calibration but under macos it give error # bugfix calibration : put in comment next line: upload_calibration = False upload_calibration = False upload_f4hwn = False def _get_bands(self): is_wide = self._memobj.BUILD_OPTIONS.ENABLE_WIDE_RX \ if self._memobj is not None else True bands = BANDS_WIDE if is_wide else BANDS_STANDARD return bands def _find_band(self, hz): mhz = hz/1000000.0 bands = self._get_bands() for bnd, rng in bands.items(): if rng[0] <= mhz <= rng[1]: return bnd return False def _get_vfo_channel_names(self): """generates VFO_CHANNEL_NAMES""" bands = self._get_bands() names = [] for bnd, rng in bands.items(): name = f"F{bnd + 1}({round(rng[0])}M-{round(rng[1])}M)" names.append(name + "A") names.append(name + "B") return names def _get_specials(self): """generates SPECIALS""" specials = {} for idx, name in enumerate(self._get_vfo_channel_names()): specials[name] = 200 + idx return specials @classmethod def get_prompts(cls): rp = chirp_common.RadioPrompts() rp.experimental = \ 'This is an experimental driver for the Quansheng UV-K5. ' \ 'It may harm your radio, or worse. Use at your own risk.\n\n' \ 'Before attempting to do any changes please download' \ 'the memory image from the radio with chirp ' \ 'and keep it. This can be later used to recover the ' \ 'original settings. \n\n' \ 'some details are not yet implemented' rp.pre_download = \ "1. Turn radio on.\n" \ "2. Connect cable to mic/spkr connector.\n" \ "3. Make sure connector is firmly connected.\n" \ "4. Click OK to download image from radio.\n\n" \ "It may not work if you turn on the radio " \ "with the cable already attached\n" rp.pre_upload = \ "1. Turn radio on.\n" \ "2. Connect cable to mic/spkr connector.\n" \ "3. Make sure connector is firmly connected.\n" \ "4. Click OK to upload the image to radio.\n\n" \ "It may not work if you turn on the radio " \ "with the cable already attached" return rp # Return information about this radio's features, including # how many memories it has, what bands it supports, etc def get_features(self): rf = chirp_common.RadioFeatures() rf.has_bank = False rf.valid_dtcs_codes = DTCS_CODES rf.has_rx_dtcs = True rf.has_ctone = True rf.has_settings = True rf.has_comment = False rf.valid_name_length = 10 rf.valid_power_levels = UVK5_POWER_LEVELS rf.valid_special_chans = self._get_vfo_channel_names() rf.valid_duplexes = ["", "-", "+", "off"] steps = STEPS.copy() steps.sort() rf.valid_tuning_steps = steps rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"] rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone", "->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"] rf.valid_characters = chirp_common.CHARSET_ASCII rf.valid_modes = ["FM", "NFM", "AM", "NAM", "USB","BYP"] rf.valid_skips = [""] # This radio supports memories 1-200, 201-214 are the VFO memories rf.memory_bounds = (1, 200) # This is what the BK4819 chip supports # Will leave it in a comment, might be useful someday # rf.valid_bands = [(18000000, 620000000), # (840000000, 1300000000) # ] rf.valid_bands = [] bands = self._get_bands() for _, rng in bands.items(): rf.valid_bands.append( (int(rng[0]*1000000), int(rng[1]*1000000))) return rf # Do a download of the radio from the serial port def sync_in(self): self._mmap = do_download(self) self.process_mmap() # Do an upload of the radio to the serial port def sync_out(self): do_upload(self) # Convert the raw byte array into a memory object structure def process_mmap(self): self._memobj = bitwise.parse(MEM_FORMAT, self._mmap) # Return a raw representation of the memory object, which # is very helpful for development def get_raw_memory(self, number): return repr(self._memobj.channel[number-1]) def validate_memory(self, mem): msgs = super().validate_memory(mem) if mem.duplex == 'off': return msgs # find tx frequency if mem.duplex == '-': txfreq = mem.freq - mem.offset elif mem.duplex == '+': txfreq = mem.freq + mem.offset else: txfreq = mem.freq # find band band = self._find_band(txfreq) if band is False: msg = f"Transmit frequency {txfreq/1000000.0:.4f}MHz " \ "is not supported by this radio" msgs.append(chirp_common.ValidationWarning(msg)) band = self._find_band(mem.freq) if band is False: msg = f"The frequency {mem.freq/1000000.0:%.4f}MHz " \ "is not supported by this radio" msgs.append(chirp_common.ValidationWarning(msg)) return msgs def _set_tone(self, mem, _mem): ((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem) if txmode == "Tone": txtoval = CTCSS_TONES.index(txtone) txmoval = 0b01 elif txmode == "DTCS": txmoval = txpol == "R" and 0b11 or 0b10 txtoval = DTCS_CODES.index(txtone) else: txmoval = 0 txtoval = 0 if rxmode == "Tone": rxtoval = CTCSS_TONES.index(rxtone) rxmoval = 0b01 elif rxmode == "DTCS": rxmoval = rxpol == "R" and 0b11 or 0b10 rxtoval = DTCS_CODES.index(rxtone) else: rxmoval = 0 rxtoval = 0 _mem.rxcodeflag = rxmoval _mem.txcodeflag = txmoval _mem.rxcode = rxtoval _mem.txcode = txtoval def _get_tone(self, mem, _mem): rxtype = _mem.rxcodeflag txtype = _mem.txcodeflag rx_tmode = TMODES[rxtype] tx_tmode = TMODES[txtype] rx_tone = tx_tone = None if tx_tmode == "Tone": if _mem.txcode < len(CTCSS_TONES): tx_tone = CTCSS_TONES[_mem.txcode] else: tx_tone = 0 tx_tmode = "" elif tx_tmode == "DTCS": if _mem.txcode < len(DTCS_CODES): tx_tone = DTCS_CODES[_mem.txcode] else: tx_tone = 0 tx_tmode = "" if rx_tmode == "Tone": if _mem.rxcode < len(CTCSS_TONES): rx_tone = CTCSS_TONES[_mem.rxcode] else: rx_tone = 0 rx_tmode = "" elif rx_tmode == "DTCS": if _mem.rxcode < len(DTCS_CODES): rx_tone = DTCS_CODES[_mem.rxcode] else: rx_tone = 0 rx_tmode = "" tx_pol = txtype == 0x03 and "R" or "N" rx_pol = rxtype == 0x03 and "R" or "N" chirp_common.split_tone_decode(mem, (tx_tmode, tx_tone, tx_pol), (rx_tmode, rx_tone, rx_pol)) # Extract a high-level memory object from the low-level memory map # This is called to populate a memory in the UI def get_memory(self, number): mem = chirp_common.Memory() if isinstance(number, str): ch_num = self._get_specials()[number] mem.extd_number = number else: ch_num = number - 1 mem.number = ch_num + 1 _mem = self._memobj.channel[ch_num] is_empty = False # We'll consider any blank (i.e. 0MHz frequency) to be empty if (_mem.freq == 0xffffffff) or (_mem.freq == 0): is_empty = True # We'll also look at the channel attributes if a memory has them tmpscn = 0 tmp_comp = 0 if ch_num < 200: _mem3 = self._memobj.ch_attr[ch_num] # scanlists tmpscn = _mem3.is_scanlistx tmp_comp = list_def(_mem3.compander, COMPANDER_LIST, 0) elif ch_num < 214: att_num = 200 + int((ch_num - 200) / 2) _mem3 = self._memobj.ch_attr[att_num] tmp_comp = list_def(_mem3.compander, COMPANDER_LIST, 0) if is_empty: mem.empty = True # set some sane defaults: mem.power = UVK5_POWER_LEVELS[2] mem.extra = RadioSettingGroup("Extra", "extra") val = RadioSettingValueList(SET_OFF_ON_LIST) rs = RadioSetting("txLock", "TXLock", val) mem.extra.append(rs) val = RadioSettingValueBoolean(False) rs = RadioSetting("busyChLockout", "BusyCL", val) mem.extra.append(rs) val = RadioSettingValueBoolean(False) rs = RadioSetting("frev", "FreqRev", val) mem.extra.append(rs) val = RadioSettingValueList(PTTID_LIST) rs = RadioSetting("pttid", "PTTID", val) mem.extra.append(rs) val = RadioSettingValueBoolean(False) rs = RadioSetting("dtmfdecode", "DTMF decode", val) if self._memobj.BUILD_OPTIONS.ENABLE_DTMF_CALLING: mem.extra.append(rs) val = RadioSettingValueList(SCRAMBLER_LIST) rs = RadioSetting("scrambler", "Scrambler", val) mem.extra.append(rs) val = RadioSettingValueList(COMPANDER_LIST) rs = RadioSetting("compander", "Compander", val) mem.extra.append(rs) val = RadioSettingValueList(SCANLIST_LIST) rs = RadioSetting("scanlists", "Scanlists", val) mem.extra.append(rs) # actually the step and duplex are overwritten by chirp based on # bandplan. they are here to document sane defaults for IARU r1 # mem.tuning_step = 25.0 # mem.duplex = "off" return mem if ch_num > 199: mem.name = self._get_vfo_channel_names()[ch_num-200] mem.immutable = ["name", "scanlists"] else: _mem2 = self._memobj.channelname[ch_num] for char in _mem2.name: if str(char) == "\xFF" or str(char) == "\x00": break mem.name += str(char) mem.name = mem.name.rstrip() # Convert your low-level frequency to Hertz mem.freq = int(_mem.freq)*10 mem.offset = int(_mem.offset)*10 if mem.offset == 0: mem.duplex = '' else: if _mem.offsetDir == FLAGS1_OFFSET_MINUS: if _mem.freq == _mem.offset: # fake tx disable by setting tx to 0 MHz mem.duplex = 'off' mem.offset = 0 else: mem.duplex = '-' elif _mem.offsetDir == FLAGS1_OFFSET_PLUS: mem.duplex = '+' else: mem.duplex = '' # tone data self._get_tone(mem, _mem) # mode temp_modes = self.get_features().valid_modes temp_modul = _mem.modulation*2 + _mem.bandwidth if temp_modul < len(temp_modes): mem.mode = temp_modes[temp_modul] elif temp_modul == 5: # USB with narrow setting mem.mode = temp_modes[4] elif temp_modul >= len(temp_modes): mem.mode = "UNSUPPORTED BY CHIRP" # tuning step tstep = _mem.step if tstep < len(STEPS): mem.tuning_step = STEPS[tstep] else: mem.tuning_step = 2.5 # power if _mem.txpower == POWER_HIGH: mem.power = UVK5_POWER_LEVELS[7] elif _mem.txpower == POWER_MEDIUM: mem.power = UVK5_POWER_LEVELS[6] elif _mem.txpower == POWER_LOW5: mem.power = UVK5_POWER_LEVELS[5] elif _mem.txpower == POWER_LOW4: mem.power = UVK5_POWER_LEVELS[4] elif _mem.txpower == POWER_LOW3: mem.power = UVK5_POWER_LEVELS[3] elif _mem.txpower == POWER_LOW2: mem.power = UVK5_POWER_LEVELS[2] elif _mem.txpower == POWER_LOW1: mem.power = UVK5_POWER_LEVELS[1] else: mem.power = UVK5_POWER_LEVELS[0] # We'll consider any blank (i.e. 0MHz frequency) to be empty if (_mem.freq == 0xffffffff) or (_mem.freq == 0): mem.empty = True else: mem.empty = False mem.extra = RadioSettingGroup("Extra", "extra") # TXLock enc = list_def(_mem.txLock, SET_OFF_ON_LIST, 0) val = RadioSettingValueList(SET_OFF_ON_LIST, None, enc) rs = RadioSetting("txLock", "TX Lock (TXLock)", val) rs.set_doc('TXLock: If the TX is permit on this channel, allow TX') mem.extra.append(rs) # BusyCL val = RadioSettingValueBoolean(_mem.busyChLockout) rs = RadioSetting("busyChLockout", "Busy Ch Lockout (BusyCL)", val) rs.set_doc('BusyCL: If the channel is Busy, do not allow TX') mem.extra.append(rs) # Frequency reverse val = RadioSettingValueBoolean(_mem.freq_reverse) rs = RadioSetting("frev", "Reverse Frequencies (R)", val) rs.set_doc('R: Is this needs to be reversed?') mem.extra.append(rs) # PTTID pttid = list_def(_mem.dtmf_pttid, PTTID_LIST, 0) val = RadioSettingValueList(PTTID_LIST, None, pttid) rs = RadioSetting("pttid", "PTT ID (PTT ID)", val) rs.set_doc('PTT ID: How do you want the ID to be sent\n' + \ '* NONE : Nothing sent\n' + \ '* UP CODE : Send UPCODE when TX.\n' + \ '* DOWW CODE : Send DWCODE when back to RX\n' + \ '* UP+DOWN Code : Send UPCODE and DWCODE\n' + \ '* APOLLO QUINDAR : Send beep at start and end of TX') mem.extra.append(rs) # DTMF DECODE val = RadioSettingValueBoolean(_mem.dtmf_decode) rs = RadioSetting("dtmfdecode", "DTMF decode (D Decd)", val) if self._memobj.BUILD_OPTIONS.ENABLE_DTMF_CALLING: mem.extra.append(rs) # Scrambler enc = list_def(_mem.scrambler, SCRAMBLER_LIST, 0) val = RadioSettingValueList(SCRAMBLER_LIST, None, enc) rs = RadioSetting("scrambler", "Scrambler (Scramb)", val) rs.set_doc('Scramb: Do you want the scrambler on this frequency?') mem.extra.append(rs) # Compander val = RadioSettingValueList(COMPANDER_LIST, None, tmp_comp) rs = RadioSetting("compander", "Compander (Compnd)", val) rs.set_doc('Compnd: Do you want to compand on this frequency?') mem.extra.append(rs) val = RadioSettingValueList(SCANLIST_LIST, None, tmpscn) rs = RadioSetting("scanlists", "Scanlists (SList)", val) rs.set_doc('SList: Is this frequency is part of a scan list?') mem.extra.append(rs) return mem def set_settings(self, settings): _mem = self._memobj for element in settings: if not isinstance(element, RadioSetting): self.set_settings(element) continue elname = element.get_name() # basic settings # VFO_A e80 ScreenChannel_A if elname == "VFO_A_chn": _mem.ScreenChannel_A = int(element.value) if _mem.ScreenChannel_A < 200: _mem.MrChannel_A = _mem.ScreenChannel_A elif _mem.ScreenChannel_A < 207: _mem.FreqChannel_A = _mem.ScreenChannel_A else: _mem.NoaaChannel_A = _mem.ScreenChannel_A # VFO_B e83 elif elname == "VFO_B_chn": _mem.ScreenChannel_B = int(element.value) if _mem.ScreenChannel_B < 200: _mem.MrChannel_B = _mem.ScreenChannel_B elif _mem.ScreenChannel_B < 207: _mem.FreqChannel_B = _mem.ScreenChannel_B else: _mem.NoaaChannel_B = _mem.ScreenChannel_B # TX_VFO channel selected A,B elif elname == "TX_VFO": _mem.TX_VFO = int(element.value) # call channel elif elname == "call_channel": _mem.call_channel = int(element.value) # squelch elif elname == "squelch": _mem.squelch = int(element.value) # TOT elif elname == "tot": _mem.max_talk_time = int(element.value) # NOAA autoscan elif elname == "noaa_autoscan": _mem.noaa_autoscan = int(element.value) # VOX elif elname == "vox": voxvalue = int(element.value) _mem.vox_switch = voxvalue > 0 _mem.vox_level = (voxvalue - 1) if _mem.vox_switch else 0 # mic gain elif elname == "mic_gain": _mem.mic_gain = int(element.value) # Channel display mode elif elname == "channel_display_mode": _mem.channel_display_mode = int(element.value) # RX Mode elif elname == "rx_mode": tmptxmode = int(element.value) tmpmainvfo = _mem.TX_VFO + 1 _mem.crossband = tmpmainvfo * bool(tmptxmode & 0b10) _mem.dual_watch = tmpmainvfo * bool(tmptxmode & 0b01) # Battery Save elif elname == "battery_save": _mem.battery_save = int(element.value) # Backlight auto mode elif elname == "backlight_time": _mem.backlight_time = int(element.value) # Backlight min elif elname == "backlight_min": _mem.backlight_min = int(element.value) # Backlight max elif elname == "backlight_max": _mem.backlight_max = int(element.value) # Backlight TX_RX elif elname == "backlight_on_TX_RX": _mem.backlight_on_TX_RX = int(element.value) # AM_fix elif elname == "AM_fix": _mem.AM_fix = int(element.value) # mic_bar elif elname == "mem.mic_bar": _mem.mic_bar = int(element.value) # Batterie txt elif elname == "_mem.battery_text": _mem.battery_text = int(element.value) # Tail tone elimination elif elname == "ste": _mem.ste = int(element.value) # VFO Open elif elname == "freq_mode_allowed": _mem.freq_mode_allowed = int(element.value) # Beep control elif elname == "button_beep": _mem.button_beep = int(element.value) # Scan resume mode elif elname == "scan_resume_mode": _mem.scan_resume_mode = int(element.value) # Keypad lock elif elname == "key_lock": _mem.key_lock = int(element.value) # Auto keypad lock elif elname == "auto_keypad_lock": _mem.auto_keypad_lock = int(element.value) # Power on display mode elif elname == "welcome_mode": _mem.power_on_dispmode = int(element.value) # Keypad Tone elif elname == "voice": _mem.voice = int(element.value) elif elname == "s0_level": _mem.s0_level = -int(element.value) elif elname == "s9_level": _mem.s9_level = -int(element.value) # elif elname == "password": # if element.value.get_value() is None or element.value == "": # _mem.password = 0xFFFFFFFF # else: # _mem.password = int(element.value) # Alarm mode elif elname == "alarm_mode": _mem.alarm_mode = int(element.value) # Reminding of end of talk elif elname == "roger_beep": _mem.roger_beep = int(element.value) # Repeater tail tone elimination elif elname == "rp_ste": _mem.rp_ste = int(element.value) # Logo string 1 elif elname == "logo1": bts = str(element.value).rstrip("\x20\xff\x00")+"\x00"*12 _mem.logo_line1 = bts[0:12]+"\x00\xff\xff\xff" # Logo string 2 elif elname == "logo2": bts = str(element.value).rstrip("\x20\xff\x00")+"\x00"*12 _mem.logo_line2 = bts[0:12]+"\x00\xff\xff\xff" # unlock settings # FLOCK elif elname == "int_flock": _mem.int_flock = int(element.value) # # 350TX # elif elname == "int_350tx": # _mem.int_350tx = int(element.value) # KILLED elif elname == "int_KILLED": _mem.int_KILLED = int(element.value) # # 200TX # elif elname == "int_200tx": # _mem.int_200tx = int(element.value) # # 500TX # elif elname == "int_500tx": # _mem.int_500tx = int(element.value) # 350EN elif elname == "int_350en": _mem.int_350en = int(element.value) # SCREN elif elname == "int_scren": _mem.int_scren = int(element.value) # battery type elif elname == "Battery_type": _mem.Battery_type = int(element.value) # set low_power f4hwn elif elname == "set_pwr": _mem.set_pwr = int(element.value) # set ptt f4hwn elif elname == "set_ptt": _mem.set_ptt = int(element.value) # set tot f4hwn elif elname == "set_tot": _mem.set_tot = int(element.value) # set eot f4hwn elif elname == "set_eot": _mem.set_eot = int(element.value) # set_contrast f4hwn elif elname == "set_contrast": _mem.set_contrast = int(element.value) # set inv f4hwn elif elname == "set_inv": _mem.set_inv = int(element.value) # set lck f4hwn elif elname == "set_lck": _mem.set_lck = int(element.value) # set met f4hwn elif elname == "set_met": _mem.set_met = int(element.value) # set gui f4hwn elif elname == "set_gui": _mem.set_gui = int(element.value) # set tmr f4hwn elif elname == "set_tmr": _mem.set_tmr = int(element.value) # set off f4hwn elif elname == "set_off_tmr": _mem.set_off_tmr = int(element.value) # fm radio for i in range(1, 21): freqname = "FM_" + str(i) if elname == freqname: val = str(element.value).strip() try: val2 = int(float(val)*10) except Exception: val2 = 0xffff if val2 < FMMIN*10 or val2 > FMMAX*10: val2 = 0xffff # raise errors.InvalidValueError( # "FM radio frequency should be a value " # "in the range %.1f - %.1f" % (FMMIN , FMMAX)) _mem.fmfreq[i-1] = val2 # dtmf settings if elname == "dtmf_side_tone": _mem.dtmf.side_tone = int(element.value) elif elname == "dtmf_separate_code": _mem.dtmf.separate_code = str(element.value) elif elname == "dtmf_group_call_code": _mem.dtmf.group_call_code = element.value elif elname == "dtmf_decode_response": _mem.dtmf.decode_response = int(element.value) elif elname == "dtmf_auto_reset_time": _mem.dtmf.auto_reset_time = int(element.value) elif elname == "dtmf_preload_time": _mem.dtmf.preload_time = int(int(element.value)/10) elif elname == "dtmf_first_code_persist_time": _mem.dtmf.first_code_persist_time = int(int(element.value)/10) elif elname == "dtmf_hash_persist_time": _mem.dtmf.hash_persist_time = int(int(element.value)/10) elif elname == "dtmf_code_persist_time": _mem.dtmf.code_persist_time = \ int(int(element.value)/10) elif elname == "dtmf_code_interval_time": _mem.dtmf.code_interval_time = \ int(int(element.value)/10) elif elname == "dtmf_permit_remote_kill": _mem.dtmf.permit_remote_kill = \ int(element.value) elif elname == "dtmf_dtmf_local_code": k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*3 _mem.dtmf.local_code = k[0:3] elif elname == "dtmf_dtmf_up_code": k = str(element.value).strip("\x20\xff\x00") + "\x00"*16 _mem.dtmf.up_code = k[0:16] elif elname == "dtmf_dtmf_down_code": k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*16 _mem.dtmf.down_code = k[0:16] elif elname == "dtmf_kill_code": k = str(element.value).strip("\x20\xff\x00") + "\x00"*5 _mem.dtmf.kill_code = k[0:5] elif elname == "dtmf_revive_code": k = str(element.value).strip("\x20\xff\x00") + "\x00"*5 _mem.dtmf.revive_code = k[0:5] elif elname == "live_DTMF_decoder": _mem.live_DTMF_decoder = int(element.value) # dtmf contacts for i in range(1, 17): varname = "DTMF_" + str(i) if elname == varname: k = str(element.value).rstrip("\x20\xff\x00") + "\x00"*8 _mem.dtmfcontact[i-1].name = k[0:8] varnumname = "DTMFNUM_" + str(i) if elname == varnumname: k = str(element.value).rstrip("\x20\xff\x00") + "\xff"*3 _mem.dtmfcontact[i-1].number = k[0:3] # scanlist stuff if elname == "slDef": _mem.slDef = int(element.value) elif elname == "sl1PriorEnab": _mem.sl1PriorEnab = int(element.value) elif elname == "sl2PriorEnab": _mem.sl2PriorEnab = int(element.value) elif elname == "sl3PriorEnab": _mem.sl3PriorEnab = int(element.value) elif elname in ["sl1PriorCh1", "sl1PriorCh2", "sl2PriorCh1", "sl2PriorCh2", "sl3PriorCh1", "sl3PriorCh2"]: val = int(element.value) if val > 200 or val < 1: val = 0xff else: val -= 1 _mem[elname] = val if elname == "key1_shortpress_action": _mem.key1_shortpress_action = KEYACTIONS_LIST.index(element.value) elif elname == "key1_longpress_action": _mem.key1_longpress_action = KEYACTIONS_LIST.index(element.value) elif elname == "key2_shortpress_action": _mem.key2_shortpress_action = KEYACTIONS_LIST.index(element.value) elif elname == "key2_longpress_action": _mem.key2_longpress_action = KEYACTIONS_LIST.index(element.value) elif elname == "keyM_longpress_action": _mem.keyM_longpress_action = KEYACTIONS_LIST.index(element.value) # this change to send power level chan in the calibration but under macos it give error # bugfix calibration : remove the comment on next 2 line: # elif elname == "upload_calibration": # self._upload_calibration = bool(element.value) elif element.changed() and elname.startswith("_mem.cal."): exec(elname + " = element.value.get_value()") def get_settings(self): _mem = self._memobj # add menu firmware with version and option display if version 3.0 and up ValFirm = "Firmware : " + self.FIRMWARE_VERSION Compair1 = "F4HWN v3.0" if self.FIRMWARE_VERSION == "": ValFirm = "Firmware : Only when read from the radio " else: FIRMWARE_VERSION_RADIO = self.FIRMWARE_VERSION if self.FIRMWARE_VERSION >= Compair1 : if _mem.BUILD_OPTIONS.ENABLE_FMRADIO and not _mem.BUILD_OPTIONS.ENABLE_BANDSCOPE : ValFirm = ValFirm + " *** with Broadcast ***" elif not _mem.BUILD_OPTIONS.ENABLE_FMRADIO and _mem.BUILD_OPTIONS.ENABLE_BANDSCOPE : ValFirm = ValFirm + " *** with BandScope ***" radio_firmware = RadioSettingGroup("radio_firmwarebasic", ValFirm) # add link for mise a jour information val = RadioSettingValueBoolean(False) def validate_Go_Web_Firmware(value): if value : msg = "To see information for the update of the Firmware F4HWN \n" ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(FIRMWARE_VERSION_UPDATE) value = False return value val.set_validate_callback(validate_Go_Web_Firmware) rs = RadioSetting("Update_Firmware_mise_a_jour","To see information for the update of the Firmware F4HWN , select this box ->", val) rs.set_doc('To see information for the update of the Firmware F4HWN !') radio_firmware.append(rs) # end add link for mise a jour information # end add menu firmware with version and option display basic = RadioSettingGroup("basic", "Basic Settings") advanced = RadioSettingGroup("advanced", "Advanced Settings") keya = RadioSettingGroup("keya", "Programmable Keys") dtmf = RadioSettingGroup("dtmf", "DTMF Settings") dtmfc = RadioSettingGroup("dtmfc", "DTMF Contacts") scanl = RadioSettingGroup("scn", "Scan Lists") unlock = RadioSettingGroup("unlock", "Unlock Settings") fmradio = RadioSettingGroup("fmradio", "FM Broadcast Receiver") calibration = RadioSettingGroup("calibration", "Calibration") help_user = RadioSettingGroup("help_user", "Help For User") roinfo = RadioSettingGroup("roinfo", "Driver Information + Link WEB") top = RadioSettings() top.append(radio_firmware) top.append(basic) top.append(advanced) top.append(keya) top.append(dtmf) if _mem.BUILD_OPTIONS.ENABLE_DTMF_CALLING: top.append(dtmfc) top.append(scanl) top.append(unlock) if _mem.BUILD_OPTIONS.ENABLE_FMRADIO: top.append(fmradio) top.append(roinfo) top.append(calibration) top.append(help_user) # helper function def append_label(radio_setting, label, descr=""): if not hasattr(append_label, 'idx'): append_label.idx = 0 val = RadioSettingValueString(len(descr), len(descr), descr) val.set_mutable(False) rs = RadioSetting("label" + str(append_label.idx), label, val) append_label.idx += 1 radio_setting.append(rs) # Programmable keys def get_action(action_num): """"get actual key action""" has_alarm = self._memobj.BUILD_OPTIONS.ENABLE_ALARM has1750 = self._memobj.BUILD_OPTIONS.ENABLE_TX1750 has_flashlight = self._memobj.BUILD_OPTIONS.ENABLE_FLASHLIGHT has_backlight_off = self._memobj.BUILD_OPTIONS.ENABLE_BLMIN_TMP_OFF lst = KEYACTIONS_LIST.copy() if not has_alarm: lst.remove("ALARM") if not has1750: lst.remove("1750Hz TONE") if not has_flashlight: lst.remove("FLASHLIGHT") if not has_backlight_off: lst.remove("Put the backlight OFF temporarily (BL_MIN_TMP_OFF)") action_num = int(action_num) if action_num >= len(KEYACTIONS_LIST) or \ KEYACTIONS_LIST[action_num] not in lst: action_num = 0 return lst, KEYACTIONS_LIST[action_num] val1s = RadioSettingValueList(*get_action(_mem.key1_shortpress_action)) rs = RadioSetting("key1_shortpress_action", "Side Key 1 Short Press (F1Shrt)", val1s) rs.set_doc('F1Shrt: Select the action to do when pressing F1 key for a ' + \ 'SHORT time, F1 key is located on the left side, first key under PTT') keya.append(rs) val1l = RadioSettingValueList(*get_action(_mem.key1_longpress_action)) rs = RadioSetting("key1_longpress_action", "Side Key 1 Long Press (F1Long)", val1l) rs.set_doc('F1Long: Select the action to do when pressing F1 key for a ' + \ 'LONG time, F1 key is located on the left side, first key under PTT') keya.append(rs) val2s = RadioSettingValueList(*get_action(_mem.key2_shortpress_action)) rs = RadioSetting("key2_shortpress_action", "Side Key 2 Short Press (F2Shrt)", val2s) rs.set_doc('F2Shrt: Select the action to do when pressing F2 key for a ' + \ 'SHORT time, F2 key is located on the left side, second key under PTT') keya.append(rs) val2l = RadioSettingValueList(*get_action(_mem.key2_longpress_action)) rs = RadioSetting("key2_longpress_action", "Side Key 2 Long Press (F2Long)", val2l) rs.set_doc('F2Long: Select the action to do when pressing F2 key for a ' + \ 'LONG time, F2 key is located on the left side, second key under PTT') keya.append(rs) valm = RadioSettingValueList(*get_action(_mem.keyM_longpress_action)) rs = RadioSetting("keyM_longpress_action", "Menu Key Long Press (M Long)", valm) rs.set_doc('M Long: Select the action to do when pressing M key for a ' + \ 'LONG time, M key is located below the screen on the left') keya.append(rs) # ----------------- DTMF settings tmpval = str(_mem.dtmf.separate_code) if tmpval not in DTMF_CODE_CHARS: tmpval = '*' val = RadioSettingValueString(1, 1, tmpval) val.set_charset(DTMF_CODE_CHARS) sep_code_setting = RadioSetting("dtmf_separate_code", "Separate Code", val) sep_code_setting.set_doc('Separate Code: ') tmpval = str(_mem.dtmf.group_call_code) if tmpval not in DTMF_CODE_CHARS: tmpval = '#' val = RadioSettingValueString(1, 1, tmpval) val.set_charset(DTMF_CODE_CHARS) group_code_setting = RadioSetting("dtmf_group_call_code", "Group Call Code", val) group_code_setting.set_doc('Group Call Code: ') tmpval = min_max_def(_mem.dtmf.first_code_persist_time * 10, 30, 1000, 300) val = RadioSettingValueInteger(30, 1000, tmpval, 10) first_code_per_setting = \ RadioSetting("dtmf_first_code_persist_time", "First Code Persist Time (ms)", val) first_code_per_setting.set_doc('First code persist time: How long to you want the first DTMF ' + \ 'will be sent (in milliseconds)') tmpval = min_max_def(_mem.dtmf.hash_persist_time * 10, 30, 1000, 300) val = RadioSettingValueInteger(30, 1000, tmpval, 10) spec_per_setting = RadioSetting("dtmf_hash_persist_time", "Persist Time (ms)", val) spec_per_setting.set_doc('#/* persist time: How long this code # or / or * will be sent (in milliseconds)') tmpval = min_max_def(_mem.dtmf.code_persist_time * 10, 30, 1000, 300) val = RadioSettingValueInteger(30, 1000, tmpval, 10) code_per_setting = RadioSetting("dtmf_code_persist_time", "Code Persist Time (ms)", val) code_per_setting.set_doc('Code persist time: How long the code will be sent (in milliseconds)') tmpval = min_max_def(_mem.dtmf.code_interval_time * 10, 30, 1000, 300) val = RadioSettingValueInteger(30, 1000, tmpval, 10) code_int_setting = RadioSetting("dtmf_code_interval_time", "Code Interval Time (ms)", val) code_int_setting.set_doc('Code interval time: How long to wait between each code sent (in milliseconds)') tmpval = str(_mem.dtmf.local_code).upper().strip( "\x00\xff\x20") for i in tmpval: if i in DTMF_CHARS_ID: continue tmpval = "103" break val = RadioSettingValueString(3, 3, tmpval) val.set_charset(DTMF_CHARS_ID) ani_id_setting = \ RadioSetting("dtmf_dtmf_local_code", "Local Code (3 chars 0-9 ABCD) (ANI ID)", val) ani_id_setting.set_doc('ANI ID: DTMF communication radio ID') tmpval = str(_mem.dtmf.up_code).upper().strip( "\x00\xff\x20") for i in tmpval: if i in DTMF_CHARS_UPDOWN or i == "": continue else: tmpval = "123" break val = RadioSettingValueString(1, 16, tmpval) val.set_charset(DTMF_CHARS_UPDOWN) up_code_setting = \ RadioSetting("dtmf_dtmf_up_code", "Up Code (1-16 chars 0-9 ABCD*#) (UPCode)", val) up_code_setting.set_doc('UPCode: DTMF code sent at the beginning of transmission') tmpval = str(_mem.dtmf.down_code).upper().strip( "\x00\xff\x20") for i in tmpval: if i in DTMF_CHARS_UPDOWN: continue else: tmpval = "456" break val = RadioSettingValueString(1, 16, tmpval) val.set_charset(DTMF_CHARS_UPDOWN) dw_code_setting = \ RadioSetting("dtmf_dtmf_down_code", "Down Code (1-16 chars 0-9 ABCD*#) (DWCode)", val) dw_code_setting.set_doc('DWCode: DTMF code sent at the end of a transmission') val = RadioSettingValueBoolean(_mem.dtmf.side_tone) dtmf_side_tone_setting = \ RadioSetting("dtmf_side_tone", "DTMF Sidetone On Speaker When Sent (D ST)", val) dtmf_side_tone_setting.set_doc('D ST: DTMF side tone switch, lets you hear transmitted ' + \ 'tones in the radio speaker') tmpval = list_def(_mem.dtmf.decode_response, DTMF_DECODE_RESPONSE_LIST, 0) val = RadioSettingValueList(DTMF_DECODE_RESPONSE_LIST, None, tmpval) dtmf_resp_setting = RadioSetting("dtmf_decode_response", "Decode Response (D Resp)", val) dtmf_resp_setting.set_doc('D Resp: DTMF decoding response') tmpval = min_max_def(_mem.dtmf.auto_reset_time, 5, 60, 10) val = RadioSettingValueInteger(5, 60, tmpval) d_hold_setting = RadioSetting("dtmf_auto_reset_time", "Auto Reset Time (s) (D Hold)", val) d_hold_setting.set_doc('D Hold: DTMF auto reset time') # D Prel tmpval = min_max_def(_mem.dtmf.preload_time * 10, 30, 990, 300) val = RadioSettingValueInteger(30, 990, tmpval, 10) d_prel_setting = RadioSetting("dtmf_preload_time", "Pre-Load Time (ms) (D Prel)", val) d_prel_setting.set_doc('D Prel: DTMF pre-load time') # D LIVE val = RadioSettingValueBoolean(_mem.live_DTMF_decoder) d_live_setting = \ RadioSetting("live_DTMF_decoder", "Displays DTMF codes" " received in the middle of the screen (D Live)", val) d_live_setting.set_doc('D Live: Displays DTMF codes received by radio in the middle of the screen') val = RadioSettingValueBoolean(_mem.dtmf.permit_remote_kill) perm_kill_setting = RadioSetting("dtmf_permit_remote_kill", "Permit Remote Kill", val) tmpval = str(_mem.dtmf.kill_code).upper().strip( "\x00\xff\x20") for i in tmpval: if i in DTMF_CHARS_KILL: continue else: tmpval = "77777" break if not len(tmpval) == 5: tmpval = "77777" val = RadioSettingValueString(5, 5, tmpval) val.set_charset(DTMF_CHARS_KILL) kill_code_setting = RadioSetting("dtmf_kill_code", "Kill Code (5 chars 0-9 ABCD)", val) tmpval = str(_mem.dtmf.revive_code).upper().strip( "\x00\xff\x20") for i in tmpval: if i in DTMF_CHARS_KILL: continue else: tmpval = "88888" break if not len(tmpval) == 5: tmpval = "88888" val = RadioSettingValueString(5, 5, tmpval) val.set_charset(DTMF_CHARS_KILL) rev_code_setting = RadioSetting("dtmf_revive_code", "Revive Code (5 chars 0-9 ABCD)", val) val = RadioSettingValueBoolean(_mem.int_KILLED) killed_setting = RadioSetting("int_KILLED", "DTMF Kill Lock", val) # ----------------- DTMF Contacts append_label(dtmfc, "DTMF Contacts (D List)", "All DTMF Contacts are 3 codes " "(valid: 0-9 * # ABCD), " "or an empty string") for i in range(1, 17): varname = "DTMF_"+str(i) varnumname = "DTMFNUM_"+str(i) vardescr = "DTMF Contact "+str(i)+" name" varinumdescr = "DTMF Contact "+str(i)+" number" cntn = str(_mem.dtmfcontact[i-1].name).strip("\x20\x00\xff") cntnum = str(_mem.dtmfcontact[i-1].number).strip("\x20\x00\xff") val = RadioSettingValueString(0, 8, cntn) rs = RadioSetting(varname, vardescr, val) dtmfc.append(rs) val = RadioSettingValueString(0, 3, cntnum) val.set_charset(DTMF_CHARS) rs = RadioSetting(varnumname, varinumdescr, val) dtmfc.append(rs) # ----------------- Scan Lists tmpscanl = list_def(_mem.slDef, SCANLIST_SELECT_LIST, 0) val = RadioSettingValueList(SCANLIST_SELECT_LIST, None, tmpscanl) rs = RadioSetting("slDef", "Default Scan Lists (SList)", val) rs.set_doc('SList: Selects which lists are used by the memory scan\n' + \ '* No List : None in the list\n' + \ '* LIST [1] : List 1 only\n' + \ '* LIST [2] : List 2 only\n' + \ '* LIST [3] : List 3 only\n' + \ '* LIST [1,2,3] : List 1 to 3\n' + \ '* ALL : All channel\n') scanl.append(rs) val = RadioSettingValueBoolean(_mem.sl1PriorEnab) rs = RadioSetting("sl1PriorEnab", "List 1 Priority Channel Scan", val) rs.set_doc('List 1 priority: Is this list has priority') scanl.append(rs) ch_list = ["None"] for ch in range(1, 201): ch_list.append("Channel M" + str(ch)) tmpch = list_def(_mem.sl1PriorCh1 + 1, ch_list, 0) val = RadioSettingValueList(ch_list, None, tmpch) rs = RadioSetting("sl1PriorCh1", "List 1 Priority Channel 1", val) rs.set_doc('List 1 priority channel 1: Select the channel you want for priority') scanl.append(rs) tmpch = list_def(_mem.sl1PriorCh2 + 1, ch_list, 0) val = RadioSettingValueList(ch_list, None, tmpch) rs = RadioSetting("sl1PriorCh2", "List 1 Priority Channel 2", val) rs.set_doc('List 1 priority channel 2: Select the channel you want for priority') scanl.append(rs) val = RadioSettingValueBoolean(_mem.sl2PriorEnab) rs = RadioSetting("sl2PriorEnab", "List 2 Priority Channel Scan", val) rs.set_doc('List 2 priority: Is this list as priority') scanl.append(rs) tmpch = list_def(_mem.sl2PriorCh1 + 1, ch_list, 0) val = RadioSettingValueList(ch_list, None, tmpch) rs = RadioSetting("sl2PriorCh1", "List 2 Priority Channel 1", val) rs.set_doc('List 2 priority channel 1: Select the channel you want for priority') scanl.append(rs) tmpch = list_def(_mem.sl2PriorCh2 + 1, ch_list, 0) val = RadioSettingValueList(ch_list, None, tmpch) rs = RadioSetting("sl2PriorCh2", "List 2 Priority Channel 2", val) rs.set_doc('List 2 priority channel 2: Select the channel you want for priority') scanl.append(rs) # add scan list 3 val = RadioSettingValueBoolean(_mem.sl3PriorEnab) rs = RadioSetting("sl3PriorEnab", "List 3 Priority Channel Scan", val) rs.set_doc('List 3 priority: Is this list as priority') scanl.append(rs) tmpch = list_def(_mem.sl3PriorCh1 + 1, ch_list, 0) val = RadioSettingValueList(ch_list, None, tmpch) rs = RadioSetting("sl3PriorCh1", "List 3 Priority Channel 1", val) rs.set_doc('List 3 priority channel 1: Select the channel you want for priority') scanl.append(rs) tmpch = list_def(_mem.sl3PriorCh2 + 1, ch_list, 0) val = RadioSettingValueList(ch_list, None, tmpch) rs = RadioSetting("sl3PriorCh2", "List 3 Priority Channel 2", val) rs.set_doc('List 3 priority channel 2: Select the channel you want for priority') scanl.append(rs) # ----------------- Basic settings ch_list = [] for ch in range(1, 201): ch_list.append("Channel M" + str(ch)) for bnd in range(1, 8): ch_list.append("Band F" + str(bnd)) if _mem.BUILD_OPTIONS.ENABLE_NOAA: for bnd in range(1, 11): ch_list.append("NOAA N" + str(bnd)) tmpfreq0 = list_def(_mem.ScreenChannel_A, ch_list, 0) val = RadioSettingValueList(ch_list, None, tmpfreq0) freq0_setting = RadioSetting("VFO_A_chn", "VFO A Current Channel/Band", val) freq0_setting.set_doc('VFO A current channel/band: To select what is displayed on the VFO A\n' + \ '* CHANNEL number M1-M200\n' + \ '* BAND F1-F7\n' + \ 'look at the correspondence between memory and frequency in the memory tab') tmpfreq1 = list_def(_mem.ScreenChannel_B, ch_list, 0) val = RadioSettingValueList(ch_list, None, tmpfreq1) freq1_setting = RadioSetting("VFO_B_chn", "VFO B Current Channel/Band", val) freq1_setting.set_doc('VFO B current channel/band: To select what is in the VFO B\n' + \ '* CHANNEL number M1-M200\n' + \ '* BAND F1-F7\n' + \ 'look at the correspondence between memory and frequency in the memory tab') tmptxvfo = list_def(_mem.TX_VFO, TX_VFO_LIST, 0) val = RadioSettingValueList(TX_VFO_LIST, None, tmptxvfo) tx_vfo_setting = RadioSetting("TX_VFO", "Main VFO", val) tx_vfo_setting.set_doc('Main VFO: To select which VFO is active, ' + \ '( A at the top, B at the bottom ) ') val = RadioSettingValueBoolean(False) def validate_upload_f4hwn(value): return value val.set_validate_callback(validate_upload_f4hwn) Upload_f4hwn = RadioSetting("upload_f4hwn", "Upload F4HWN's settings to radio", val) Upload_f4hwn.set_doc('This section of settings is in a different memory space, ' + \ 'so it needs to be uploaded to radio separately. Check this case to ' + \ 'upload ONLY all the sections of F4HWN\'s settings to radio. ' + \ 'It will be very fast to upload, then the radio will reboot.\n' + \ 'After uploading, uncheck the box to be able to upload all other settings.') self.upload_f4hwn = val # Set_Low_Power f4hwn tmpsetpwr = list_def(_mem.set_pwr, SET_LOW_LIST, 0) val = RadioSettingValueList(SET_LOW_LIST, SET_LOW_LIST[tmpsetpwr]) SetPwrSetting = RadioSetting("set_pwr", "Define Power Value when User selection is selected in POWER (SetPwr)", val) SetPwrSetting.set_doc('SetPwr: This is the level TX power when (Power) is set to User,.\n' + \ '(see the "Power" column in the memories tab to set the TX level for each channel), ' + \ 'if the User level is select, it will use this TX power level ') # Set_Ptt f4hwn tmpsetptt = list_def(_mem.set_ptt, SET_PTT_LIST, 0) val = RadioSettingValueList(SET_PTT_LIST, SET_PTT_LIST[tmpsetptt]) SetPttSetting = RadioSetting("set_ptt", "Ptt Mode: Set PTT Key Operating Mode (SetPtt)", val) SetPttSetting.set_doc('SetPtt :\n' + \ '* CLASSIC : press and hold to transmit, release to stop the transmission.\n' + \ '* ONEPUSH : press once to transmit, no need to hold.\n' + \ ' Simply press once to start transmission, and press a second time to stop.\n' + \ ' No more finger cramps :) ') # Set_tot f4hwn tmpsettot = list_def(_mem.set_tot, SET_TOT_EOT_LIST, 0) val = RadioSettingValueList(SET_TOT_EOT_LIST, SET_TOT_EOT_LIST[tmpsettot]) SetTotSetting = RadioSetting("set_tot", "Set TX Timeout Indicator (SetTot)", val) SetTotSetting.set_doc('SetTot: Indication of the TX timeout\n' + \ '* NONE : no information\n' + \ '* SOUND : audio information\n' + \ '* VISUAL : screen blinking\n' + \ '* ALL : audio and screen blinking') # Set_eot f4hwn tmpseteot = list_def(_mem.set_eot, SET_TOT_EOT_LIST, 0) val = RadioSettingValueList(SET_TOT_EOT_LIST, SET_TOT_EOT_LIST[tmpseteot]) SetEotSetting = RadioSetting("set_eot", "Set End Of Transmission Indicator (SetEot)", val) SetEotSetting.set_doc('SetEot: End Of Transmission indication\n' + \ '* NONE : no information\n' + \ '* SOUND : audio information\n' + \ '* VISUAL : screen blinking\n' + \ '* ALL : audio and screen blinking') # Set_contrast f4hwn tmpcontrast = min_max_def(_mem.set_contrast, 0, 15, 11) val = RadioSettingValueInteger(0, 15, tmpcontrast) contrastSetting = RadioSetting("set_contrast", "Set Contrast Level (SetCtr)", val) contrastSetting.set_doc('SetCtr: Set the display contrast level from 0 to 15, default is 10') # Set_inv f4hwn tmpsetinv = list_def(_mem.set_inv, SET_OFF_ON_LIST, 0) val = RadioSettingValueList(SET_OFF_ON_LIST, SET_OFF_ON_LIST[tmpsetinv]) SetInvSetting = RadioSetting("set_inv", "Invert Display (SetInv)", val) SetInvSetting.set_doc('SetInv: black text on light background or light text on black background\n' + \ '* OFF : black text (default)\n' + \ '* ON : light text') # Set_lck, uses tmpsetlck = list_def(_mem.set_lck, SET_LCK_LIST, 0) val = RadioSettingValueList(SET_LCK_LIST, SET_LCK_LIST[tmpsetlck]) SetLckSetting = RadioSetting("set_lck", "Lock PTT Key When Keypad Is Locked (SetLck)", val) SetLckSetting.set_doc('SetLck: When the keypad is locked, lock also the PTT key') # Set_met f4hwn tmpsetmet = list_def(_mem.set_met, SET_MET_LIST, 0) val = RadioSettingValueList(SET_MET_LIST, SET_MET_LIST[tmpsetmet]) SetMetSetting = RadioSetting("set_met", "S-Meter Display Style (SetMet)", val) SetMetSetting.set_doc('SetMet: Change the style of the S-meter display\n' + \ '* CLASSIC : classic display\n' + \ '* TINY : smaller display') # Set_gui f4hwn tmpsetgui = list_def(_mem.set_gui, SET_MET_LIST, 0) val = RadioSettingValueList(SET_MET_LIST, SET_MET_LIST[tmpsetgui]) SetGuiSetting = RadioSetting("set_gui", "Display Text Style (SetGui)", val) SetGuiSetting.set_doc('SetGui: Change the display text style\n' + \ '* CLASSIC : normal font\n' + \ '* TINY : smaller font') # Set_tmr f4hwn tmpsettmr = list_def(_mem.set_tmr, SET_OFF_ON_LIST, 0) val = RadioSettingValueList(SET_OFF_ON_LIST, SET_OFF_ON_LIST[tmpsettmr]) SetTmrSetting = RadioSetting("set_tmr", "Set Timer (SetTmr)", val) SetTmrSetting.set_doc('SetTmr: To enable or disable the timer on transmit and receive (on the left of the status bar...)\n' + \ '* OFF : Disable \n' + \ '* ON : Enable ') # Set_off f4hwn tmpsetoff = list_def(_mem.set_off_tmr, SET_OFF_TMR_LIST, 0) val = RadioSettingValueList(SET_OFF_TMR_LIST, SET_OFF_TMR_LIST[tmpsetoff]) SetOffSetting = RadioSetting("set_off_tmr", "Set Off (SetOff)", val) SetOffSetting.set_doc('SetOff: Put the radio in battery save, when no RX or keypress \n' + \ 'To inform you that the radio is in this mode, the Led will flashing in RED \n' + \ 'the Display will be OFF and hardware go in sleepmode') tmpsq = min_max_def(_mem.squelch, 0, 9, 1) val = RadioSettingValueInteger(0, 9, tmpsq) squelch_setting = RadioSetting("squelch", "Squelch (Sql)", val) squelch_setting.set_doc('Sql: Squelch sensitivity level from 0 to 9, 0 to disable squelch') ch_list = [] for ch in range(1, 201): ch_list.append("Channel M" + str(ch)) tmpc = list_def(_mem.call_channel, ch_list, 0) val = RadioSettingValueList(ch_list, None, tmpc) call_channel_setting = RadioSetting("call_channel", "One-Key Call Channel (1 Call)", val) call_channel_setting.set_doc('1 Call: One-key call channel, lets you quickly switch to the ' + \ 'designed channel with the "9 Call" key ') val = RadioSettingValueBoolean(_mem.key_lock) keypad_lock_setting = RadioSetting("key_lock", "Keypad Locked", val) keypad_lock_setting.set_doc('Keypad locked: Lock the keypad now') tmpval = list_def(_mem.auto_keypad_lock, AUTO_KEYPAD_LOCK_LIST, 1) val = RadioSettingValueList(AUTO_KEYPAD_LOCK_LIST, None, tmpval) auto_keypad_lock_setting = RadioSetting("auto_keypad_lock", "Auto Lock Keypad After Inactivity 15s (KeyLck)", val) auto_keypad_lock_setting.set_doc('KeyLck: Keypad lock\n' + \ '* AUTO : After 15s of inactivity\n' + \ '* OFF : No keypad lock') tmptot = list_def(_mem.max_talk_time, TALK_TIME_LIST, 1) val = RadioSettingValueList(TALK_TIME_LIST, None, tmptot) tx_t_out_setting = RadioSetting("tot", "Max TX Timeout (TxTOut)", val) tx_t_out_setting.set_doc('TxTOut: Select the TX time limit\n' + \ 'See option (SetTot) of F4HWN') tmpbatsave = list_def(_mem.battery_save, BATSAVE_LIST, 4) val = RadioSettingValueList(BATSAVE_LIST, None, tmpbatsave) bat_save_setting = RadioSetting("battery_save", "Battery Saver (BatSav)", val) bat_save_setting.set_doc('BatSav: Battery saver option, ratio between active time and sleep time') val = RadioSettingValueBoolean(_mem.noaa_autoscan) noaa_auto_scan_setting = RadioSetting("noaa_autoscan", "NOAA Autoscan (NOAA-S)", val) noaa_auto_scan_setting.set_doc('NOAA-S: ') tmpmicgain = list_def(_mem.mic_gain, MIC_GAIN_LIST, 2) val = RadioSettingValueList(MIC_GAIN_LIST, None, tmpmicgain) mic_gain_setting = RadioSetting("mic_gain", "Mic Gain (Mic)", val) mic_gain_setting.set_doc('Mic: Set the microphone sensitivity level (Gain)') val = RadioSettingValueBoolean(_mem.mic_bar) mic_bar_setting = RadioSetting("mic_bar", "Microphone Level Bar Display (MicBar)", val) mic_bar_setting.set_doc('MicBar: Display the microphone level bar while transmitting') tmpchdispmode = list_def(_mem.channel_display_mode, CHANNELDISP_LIST, 0) val = RadioSettingValueList(CHANNELDISP_LIST, None, tmpchdispmode) ch_disp_setting = RadioSetting("channel_display_mode", "Channel Display Mode (ChDisp)", val) ch_disp_setting.set_doc('ChDisp: What to display on screen:\n' + \ '* NAME\n' + \ '* CHANNEL NUMBER\n' + \ '* FREQ\n' + \ '* NAME + FREQ') tmpdispmode = list_def(_mem.power_on_dispmode, WELCOME_LIST, 0) val = RadioSettingValueList(WELCOME_LIST, None, tmpdispmode) p_on_msg_setting = RadioSetting("welcome_mode", "Power On Display Message (POnMsg)", val) p_on_msg_setting.set_doc('POnMsg: When powering up the radio, what to display:\n' + \ '* ALL : message line 1 + voltage + sound\n' + \ '* SOUND : beep beep 2 only\n' + \ '* MESSAGE : message lines 1 and 2 only\n' + \ '* VOLTAGE : battery voltage only\n' + \ '* NONE : nothing') logo1 = str(_mem.logo_line1).strip("\x20\x00\xff") + "\x00" logo1 = _getstring(logo1.encode('ascii', errors='ignore'), 0, 12) val = RadioSettingValueString(0, 12, logo1) logo1_setting = RadioSetting("logo1", "Message Line 1 (12 characters max)", val) logo1_setting.set_doc('Message line 1: The first message line,\n' + \ 'with a maximum of 12 characters\n' + \ 'See option (POnMsg) to display it') logo2 = str(_mem.logo_line2).strip("\x20\x00\xff") + "\x00" logo2 = _getstring(logo2.encode('ascii', errors='ignore'), 0, 12) val = RadioSettingValueString(0, 12, logo2) logo2_setting = RadioSetting("logo2", "Message Line 2 (12 characters max)", val) logo2_setting.set_doc('Message line 2: the second message line,\n' + \ 'with a maximum of 12 characters\n' + \ 'See option (POnMsg) to display it') tmpbattxt = list_def(_mem.battery_text, BAT_TXT_LIST, 2) val = RadioSettingValueList(BAT_TXT_LIST, None, tmpbattxt) bat_txt_setting = RadioSetting("battery_text", "Battery Level Display (BatTXT)", val) bat_txt_setting.set_doc('BatTXT: Display additional battery info on the status bar\n' + \ '* PERCENT : Percentage of remaining power\n' + \ '* VOLTAGE : Voltage\n' + \ '* NONE : Nothing') tmpback = list_def(_mem.backlight_time, BACKLIGHT_LIST, 0) val = RadioSettingValueList(BACKLIGHT_LIST, None, tmpback) back_lt_setting = RadioSetting("backlight_time", "Backlight Time (BLTime)", val) back_lt_setting.set_doc('BLTime: Backlight duration, how long the backlight will stay on\n' + \ 'after the end of an action') tmpback = list_def(_mem.backlight_min, BACKLIGHT_LVL_LIST, 0) val = RadioSettingValueList(BACKLIGHT_LVL_LIST, None, tmpback) bl_min_setting = RadioSetting("backlight_min", "Minimum Backlight Level (BLMin)", val) bl_min_setting.set_doc('BLMin: Minimum backlight brightness, when the screen backlight turns off\n' + \ 'it will dim to this value') tmpback = list_def(_mem.backlight_max, BACKLIGHT_LVL_LIST, 10) val = RadioSettingValueList(BACKLIGHT_LVL_LIST, None, tmpback) bl_max_setting = RadioSetting("backlight_max", "Maximum Backlight Level (BLMax)", val) bl_max_setting.set_doc('BLMax: Maximum backlight brightness, when the screen backlight turns on\n' + \ 'it will light up to this value') tmpback = list_def(_mem.backlight_on_TX_RX, BACKLIGHT_TX_RX_LIST, 0) val = RadioSettingValueList(BACKLIGHT_TX_RX_LIST, None, tmpback) blt_trx_setting = RadioSetting("backlight_on_TX_RX", "Backlight on TX/RX (BLTxRx)", val) blt_trx_setting.set_doc('BLTxRx : Backlight activation on TX or RX or both TX and RX or no backlight at all\n' + \ '* OFF : OFF in all cases\n' + \ '* TX : turn ON when TX only\n' + \ '* RX : ON when RX only\n' + \ '* TX/RX : ON when TX and RX') val = RadioSettingValueBoolean(_mem.button_beep) beep_setting = RadioSetting("button_beep", "Keypad Beep (Beep)", val) beep_setting.set_doc('Beep: Beep sound when a key is pressed') tmpalarmmode = list_def(_mem.roger_beep, ROGER_LIST, 0) val = RadioSettingValueList(ROGER_LIST, None, tmpalarmmode) roger_setting = RadioSetting("roger_beep", "End Of Transmission Beep (Roger)", val) roger_setting.set_doc('Roger: Squelch tail eliminator, eliminates noise at the end of a transmission') val = RadioSettingValueBoolean(_mem.ste) ste_setting = RadioSetting("ste", "Squelch Tail Elimination (STE)", val) ste_setting.set_doc('STE: Squelch tail eliminator, eliminates noise at the end of a transmission') tmprte = list_def(_mem.rp_ste, RTE_LIST, 0) val = RadioSettingValueList(RTE_LIST, None, tmprte) rp_ste_setting = RadioSetting("rp_ste", "Repeater Squelch Tail Elimination (RP STE)", val) rp_ste_setting.set_doc('RP STE: Repeater squelch tail eliminator') val = RadioSettingValueBoolean(_mem.AM_fix) am_fix_setting = RadioSetting("AM_fix", "AM Reception Fix (AM Fix) ** Has no effect with firmware 3.0 or higher **", val) am_fix_setting.set_doc('AM Fix: Activates autogain in AM reception ** Has no effect with firmware 3.0 or higher **') tmpvox = min_max_def((_mem.vox_level + 1) * _mem.vox_switch, 0, 10, 0) val = RadioSettingValueList(VOX_LIST, None, tmpvox) vox_setting = RadioSetting("vox", "Voice-Operated Switch (VOX)", val) vox_setting.set_doc('VOX: Voice TX activation sensitivity level') tmprxmode = list_def((bool(_mem.crossband) << 1) + bool(_mem.dual_watch), RXMODE_LIST, 0) val = RadioSettingValueList(RXMODE_LIST, None, tmprxmode) rx_mode_setting = RadioSetting("rx_mode", "RX Mode (RX MODE)", val) rx_mode_setting.set_doc('RX MODE:\n' + \ '* MAIN ONLY : Transmits and listens on the main frequency\n' + \ '* DUAL RX RESPOND : Listens both frequencies, if signal received on the secondary frequency, it locks to \n' + \ 'it for a couple of seconds so you can respond to the call (DWR)\n' + \ '* CROSS BAND : Always transmits on the primary and listens on the secondary frequency (XB)\n' + \ '* MAIN TX DUAL RX : Always transmits on the primary, listens to both (DW)') val = RadioSettingValueBoolean(_mem.freq_mode_allowed) freq_mode_allowed_setting = RadioSetting("freq_mode_allowed", "Frequency Mode Allowed", val) freq_mode_allowed_setting.set_doc('Frequency mode allowed') tmpscanres = list_def(_mem.scan_resume_mode, SCANRESUME_LIST, 0) val = RadioSettingValueList(SCANRESUME_LIST, None, tmpscanres) scn_rev_setting = RadioSetting("scan_resume_mode", "Scan Resume Mode (ScnRev)", val) scn_rev_setting.set_doc('ScnRev: Scan Resume Mode\n' + \ '* CARRIER FAST : 100 milisecond, Resume scan after signal disappears\n' + \ '* CARRIER SLOW : 2.5 second, Resume scan after signal disappears\n' + \ '* STOP : After receiving a signal, stop the scan\n' + \ '* TIMEOUT : Resume scan after X seconds pause') tmpvoice = list_def(_mem.voice, VOICE_LIST, 0) val = RadioSettingValueList(VOICE_LIST, None, tmpvoice) voice_setting = RadioSetting("voice", "Voice", val) voice_setting.set_doc('Voice: Voice announcement\n' + \ '* NONE : No voice\n' + \ '* CHINA : Chinese voice\n' + \ '* ENGLISH : English voice') tmpalarmmode = list_def(_mem.alarm_mode, ALARMMODE_LIST, 0) val = RadioSettingValueList(ALARMMODE_LIST, None, tmpalarmmode) alarm_setting = RadioSetting("alarm_mode", "Alarm Mode", val) # ----------------- Extra settings # S-meter tmp_s0 = -int(_mem.s0_level) tmp_s9 = -int(_mem.s9_level) if tmp_s0 not in range(-200, -91) or tmp_s9 not in range(-160, -51) \ or tmp_s9 < tmp_s0+9: tmp_s0 = -130 tmp_s9 = -76 val = RadioSettingValueInteger(-200, -90, tmp_s0) s0_level_setting = RadioSetting("s0_level", "S-Meter S0 Level (dBm)", val) s0_level_setting.set_doc('S-meter S0 level (dBm): To set the level calibration for S0') val = RadioSettingValueInteger(-160, -50, tmp_s9) s9_level_setting = RadioSetting("s9_level", "S-Meter S9 Level (dBm)", val) s9_level_setting.set_doc('S-meter S9 level (dBm): To set the level calibration for S9') # Battery Type tmpbtype = list_def(_mem.Battery_type, BATTYPE_LIST, 0) val = RadioSettingValueList(BATTYPE_LIST, BATTYPE_LIST[tmpbtype]) bat_type_setting = RadioSetting("Battery_type", "Battery Type (BatTyp)", val) bat_type_setting.set_doc('BatTyp: What type of battery the radio is using, this affect\n' + \ 'the level value of the battery on the display') # Power on password # def validate_password(value): # value = value.strip(" ") # if value.isdigit(): # return value.zfill(6) # if value != "": # raise InvalidValueError("Power on password " # "can only have digits") # return "" # pswd_str = str(int(_mem.password)).zfill(6) \ # if _mem.password < 1000000 else "" # val = RadioSettingValueString(0, 6, pswd_str) # val.set_validate_callback(validate_password) # pswd_setting = RadioSetting("password", "Power on password", val) # ----------------- FM radio append_label(fmradio, "Channel Memory Radio (MR)", "Frequency (MHz)") for i in range(1, 21): fmfreq = _mem.fmfreq[i-1]/10.0 freq_name = str(fmfreq) if fmfreq < FMMIN or fmfreq > FMMAX: freq_name = "" rs = RadioSetting("FM_" + str(i), "Ch " + str(i), RadioSettingValueString(0, 5, freq_name)) rs.set_doc('FM Broadcast frequency: Enter the frequency in MHz, example: 96.9\n' + \ 'To listen the FM Broadcast band, Long press the 5 key, then if you want to scan for\n' + \ 'stations around, press *. Scan result will erase the existing FM broadcast list.') fmradio.append(rs) # ----------------- Unlock settings # F-LOCK def validate_int_flock(value): mem_val = self._memobj.int_flock if mem_val != 8 and value == FLOCK_LIST[8]: msg = "\"" + value + "\" can only be enabled from radio menu" raise InvalidValueError(msg) return value tmpflock = list_def(_mem.int_flock, FLOCK_LIST, 0) val = RadioSettingValueList(FLOCK_LIST, None, tmpflock) val.set_validate_callback(validate_int_flock) f_lock_setting = RadioSetting("int_flock", "TX Frequency Lock (F Lock)", val) f_lock_setting.set_doc('F Lock: Sets the TX frequency band plan') # val = RadioSettingValueBoolean(_mem.int_200tx) # tx200_setting = RadioSetting("int_200tx", "Unlock 174-350 MHz TX (Tx 200)", val) # tx200_setting.set_doc('Enables transmission on 200 MHz') # val = RadioSettingValueBoolean(_mem.int_350tx) # tx350_setting = RadioSetting("int_350tx", "Unlock 350-400 MHz TX (Tx 350)", val) # tx350_setting.set_doc('Enables transmission on 350 MHz') # val = RadioSettingValueBoolean(_mem.int_500tx) # tx500_setting = RadioSetting("int_500tx", "Unlock 500-600 MHz TX (Tx 500)", val) # tx500_setting.set_doc('Enables transmission on 500 MHz') val = RadioSettingValueBoolean(_mem.int_350en) en350_setting = RadioSetting("int_350en", "Unlock 350-400 MHz RX (350 En)", val) en350_setting.set_doc('Enables reception on 350 MHz') val = RadioSettingValueBoolean(_mem.int_scren) en_scrambler_setting = RadioSetting("int_scren", "Scrambler Enabled (ScraEn)", val) en_scrambler_setting.set_doc('Enables Scrambler') # ----------------- Driver Info if self.FIRMWARE_VERSION == "": firmware = "To get the firmware version please download " \ "the image from the radio first" else: firmware = self.FIRMWARE_VERSION append_label(roinfo, "=" * 6 + " Firmware F4HWN " + "=" * 300, "=" * 300) append_label(roinfo, "Firmware Version", firmware) # message box to the web page link (firmware) val = RadioSettingValueBoolean(False) def validate_Go_Web_Page0(value): if value : msg = "Go to the web Page of the Firmware F4HWN \n" \ + FIRMWARE_VERSION_UPDATE ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(FIRMWARE_VERSION_UPDATE) value = False return value val.set_validate_callback(validate_Go_Web_Page0) rs = RadioSetting("Update_Firmware_0","Go to the web page of Latest Firmware F4HWN select this Box ->", val) rs.set_doc('Be sure you have the latest firmware available!') roinfo.append(rs) val = RadioSettingValueString(0,75,FIRMWARE_VERSION_UPDATE) rs = RadioSetting("Update_Firmware_1","Or copy this link (CTRL-C), paste (CTRL-V) to your browser -> ", val) rs.set_doc('Be sure you have the latest firmware available!') roinfo.append(rs) append_label(roinfo, "The Firmware is done by F4HWN","") append_label(roinfo,"","") append_label(roinfo, "=" * 6 + " Chirp Driver F4HWN " + "=" * 300, "=" * 300) append_label(roinfo, "Driver Chirp Version ", DRIVER_VERSION) # message box to the web page link (chirp) val = RadioSettingValueBoolean(False) def validate_Go_Web_Page(value): if value : msg = "Go to the web Page of the Chirp Driver F4HWN \n" \ + CHIRP_DRIVER_VERSION_UPDATE ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(CHIRP_DRIVER_VERSION_UPDATE) value = False return value val.set_validate_callback(validate_Go_Web_Page) rs = RadioSetting("Update_Driver_Chirp_0","Go to the web page of Latest chirp Driver F4HWN select this Box ->", val) rs.set_doc('Be sure you have the latest CHIRP driver available!') roinfo.append(rs) val = RadioSettingValueString(0,75,CHIRP_DRIVER_VERSION_UPDATE) rs = RadioSetting("Update_Driver_Chirp_1","Or copy this link (CTRL-C), paste (CTRL-V) to your browser -> ", val) rs.set_doc('Be sure you have the latest CHIRP driver available!') roinfo.append(rs) append_label(roinfo, "The driver module is done by VE2ZJM","The first french translation was done by FLIXX") append_label(roinfo,"","" ) append_label(roinfo, "=" * 6 + " PDF File for Firmware F4HWN " + "=" * 300, "=" * 300) append_label(roinfo, "PDF File","The PDF file is done by 14UVR010") # message box to the web page link (PDF) val = RadioSettingValueBoolean(False) def validate_Go_Web_Page2(value): if value : msg = "Go to the web Page of the full explanation for Firmware F4HWN \n" \ + PDF_FILE_ALAIN_UPDATE ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(PDF_FILE_ALAIN_UPDATE) value = False return value val.set_validate_callback(validate_Go_Web_Page2) rs = RadioSetting("Update_Pdf_0","Go to the web Page of the full explanation for Firmware F4HWN select this Box ->", val) rs.set_doc('Be sure you have the latest PDF File to get all info!') roinfo.append(rs) append_label(roinfo,"" ,"" ) # message box to the web page link (PDF) append_label(roinfo, "QUICK KEY File","The Quick key file is done by IK5WWG" ) val = RadioSettingValueBoolean(False) def validate_Go_Web_Page3(value): if value : msg = "Go to the web Page of the QUICK KEY For Firmware F4HWN \n" \ + PDF_FILE_QUICK_KEY ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(PDF_FILE_QUICK_KEY) value = False return value val.set_validate_callback(validate_Go_Web_Page3) rs = RadioSetting("Update_Pdf_3","Go to the web Page of the QUICK KEY For Firmware F4HWN select this Box ->", val) rs.set_doc('Go see the quick Key info!') roinfo.append(rs) append_label(roinfo,"" ,"" ) # message box to the web page link (youtube) append_label(roinfo, "=" * 6 + " YOUTUBE CHANNEL of F4HWN " + "=" * 300, "=" * 300) val = RadioSettingValueBoolean(False) def validate_Go_Web_Page3(value): if value : msg = "Go to the youtube channel of F4HWN \n" \ + CHAINE_F4HWN ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(CHAINE_F4HWN) value = False return value val.set_validate_callback(validate_Go_Web_Page3) rs = RadioSetting("CHAINE_YOUTUBE","Go to the youtube channel of F4HWN select this Box ->", val) rs.set_doc('For video explain firmware F4HWN') roinfo.append(rs) append_label(roinfo,"" ,"" ) # message box to the web page link (youtube allemand) append_label(roinfo, "=" * 6 + " SOME YOUTUBE LINK INFO IN SOME LANGUAGE FOR F4HWN " + "=" * 300, "=" * 300) # 1 youtube link #YOUTUBE_INFO_FUNKWELLE val = RadioSettingValueBoolean(False) def validate_Go_Web_Page3(value): if value : msg = "Open Youtube web page from FUNKWELLE in GERMAN \n" \ + YOUTUBE_INFO_FUNKWELLE ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(YOUTUBE_INFO_FUNKWELLE) value = False return value val.set_validate_callback(validate_Go_Web_Page3) rs = RadioSetting("CHAINE_YOUTUBE3","Youtube from FUNKWELLE (German) select this Box ->", val) rs.set_doc('For video explain firmware F4HWN') roinfo.append(rs) # 2 youtube channel YOUTUBE_INFO_M7FRS val = RadioSettingValueBoolean(False) def validate_Go_Web_Page4(value): if value : msg = "Open Youtube web page from M7FRS \n" \ + YOUTUBE_INFO_M7FRS ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(YOUTUBE_INFO_M7FRS) value = False return value val.set_validate_callback(validate_Go_Web_Page4) rs = RadioSetting("CHAINE_YOUTUBE4","Youtube from M7FRS select this Box ->", val) rs.set_doc('For video explain firmware F4HWN') roinfo.append(rs) # 3 youtube channel YOUTUBE_INFO_PU4BLA val = RadioSettingValueBoolean(False) def validate_Go_Web_Page5(value): if value : msg = "Open Youtube web page from PU4BLA \n" \ + YOUTUBE_INFO_PU4BLA ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(YOUTUBE_INFO_PU4BLA) value = False return value val.set_validate_callback(validate_Go_Web_Page5) rs = RadioSetting("CHAINE_YOUTUBE5","Youtube from PU4BLA select this Box ->", val) rs.set_doc('For video explain firmware F4HWN') roinfo.append(rs) # 4 youtube channel YOUTUBE_INFO_R3MDG val = RadioSettingValueBoolean(False) def validate_Go_Web_Page6(value): if value : msg = "Open Youtube web page from R3MDG \n" \ + YOUTUBE_INFO_R3MDG ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(YOUTUBE_INFO_R3MDG) value = False return value val.set_validate_callback(validate_Go_Web_Page6) rs = RadioSetting("CHAINE_YOUTUBE6","Youtube from R3MDG select this Box ->", val) rs.set_doc('For video explain firmware F4HWN') roinfo.append(rs) # 5 youtube channel YOUTUBE_INFO_PY2MAJ_BRAZIL val = RadioSettingValueBoolean(False) def validate_Go_Web_Page7(value): if value : msg = "Open Youtube web page from PY2MAJ_BRAZIL \n" \ + YOUTUBE_INFO_PY2MAJ_BRAZIL ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(YOUTUBE_INFO_PY2MAJ_BRAZIL) value = False return value val.set_validate_callback(validate_Go_Web_Page7) rs = RadioSetting("CHAINE_YOUTUBE7","Youtube from PY2MAJ_BRAZIL select this Box ->", val) rs.set_doc('For video explain firmware F4HWN') roinfo.append(rs) # 6 youtube channel YOUTUBE_INFO_HA8CSY_HUNGARIA val = RadioSettingValueBoolean(False) def validate_Go_Web_Page8(value): if value : msg = "Open Youtube web page from HA8CSY_HUNGARIA \n" \ + YOUTUBE_INFO_HA8CSY_HUNGARIA ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) if ret == wx.OK : webbrowser.open(YOUTUBE_INFO_HA8CSY_HUNGARIA) value = False return value val.set_validate_callback(validate_Go_Web_Page8) rs = RadioSetting("CHAINE_YOUTUBE8","Youtube from HA8CSY_HUNGARIA select this Box ->", val) rs.set_doc('For video explain firmware F4HWN') roinfo.append(rs) # ----------------- Calibration val = RadioSettingValueBoolean(False) def validate_upload_calibration(value): if value and not self.upload_calibration: msg = "This option may break your radio!!!\n" \ "You are doing this at your own risk.\n" \ "Make sure you have a working calibration backup.\n" \ "Don't use it unless you know what you're doing." ret = wx.MessageBox(msg, "Warning", wx.OK | wx.CANCEL | wx.CANCEL_DEFAULT | wx.ICON_WARNING) value = ret == wx.OK self.upload_calibration = value return value val.set_validate_callback(validate_upload_calibration) radio_setting = RadioSetting("upload_calibration", "Upload Calibration", val) radio_setting.set_doc('To Upload only the setting in the calibration section to the radio, ' + \ 'you need to check this box, then upload to radio.') calibration.append(radio_setting) radio_setting_group = RadioSettingGroup("squelch_calibration", "Squelch") calibration.append(radio_setting_group) bands = {"sqlBand1_3": "Frequency Band 1-3", "sqlBand4_7": "Frequency Band 4-7"} for bnd, bndn in bands.items(): append_label(radio_setting_group, "=" * 6 + " " + bndn + " " + "=" * 300, "=" * 300) for sql in range(0, 10): prefix = "_mem.cal." + bnd + "." postfix = "[" + str(sql) + "]" append_label(radio_setting_group, "Squelch " + str(sql)) name = prefix + "openRssiThr" + postfix tempval = min_max_def(eval(name), 0, 255, 0) val = RadioSettingValueInteger(0, 255, tempval) radio_setting = RadioSetting(name, "Open RSSI Threshold", val) radio_setting_group.append(radio_setting) name = prefix + "closeRssiThr" + postfix tempval = min_max_def(eval(name), 0, 255, 0) val = RadioSettingValueInteger(0, 255, tempval) radio_setting = RadioSetting(name, "Close RSSI Threshold", val) radio_setting_group.append(radio_setting) name = prefix + "openNoiseThr" + postfix tempval = min_max_def(eval(name), 0, 127, 0) val = RadioSettingValueInteger(0, 127, tempval) radio_setting = RadioSetting(name, "Open Noise Threshold", val) radio_setting_group.append(radio_setting) name = prefix + "closeNoiseThr" + postfix tempval = min_max_def(eval(name), 0, 127, 0) val = RadioSettingValueInteger(0, 127, tempval) radio_setting = RadioSetting(name, "Close Noise Threshold", val) radio_setting_group.append(radio_setting) name = prefix + "openGlitchThr" + postfix tempval = min_max_def(eval(name), 0, 255, 0) val = RadioSettingValueInteger(0, 255, tempval) radio_setting = RadioSetting(name, "Open Glitch Threshold", val) radio_setting_group.append(radio_setting) name = prefix + "closeGlitchThr" + postfix tempval = min_max_def(eval(name), 0, 255, 0) val = RadioSettingValueInteger(0, 255, tempval) radio_setting = RadioSetting(name, "Close Glitch Threshold", val) radio_setting_group.append(radio_setting) radio_setting_group = RadioSettingGroup("rssi_level_calibration", "RSSI Levels") calibration.append(radio_setting_group) bands = {"rssiLevelsBands1_2": "1-2 ", "rssiLevelsBands3_7": "3-7 "} for bnd, bndn in bands.items(): append_label(radio_setting_group, "=" * 6 + " RSSI levels for QS original small bar graph, bands " + bndn + "=" * 300, "=" * 300) for lvl in [1, 2, 4, 6]: name = "_mem.cal." + bnd + ".level" + str(lvl) tempval = min_max_def(eval(name), 0, 65535, 0) val = RadioSettingValueInteger(0, 65535, tempval) radio_setting = RadioSetting(name, "Level " + str(lvl), val) radio_setting_group.append(radio_setting) # radio_setting_group = RadioSettingGroup("tx_power_calibration", "TX power") calibration.append(radio_setting_group) for bnd in range(0, 7): append_label(radio_setting_group, "=" * 6 + " TX power band " + str(bnd+1) + " " + "=" * 300, "=" * 300) powers = {"low": "Low", "mid": "Medium", "hi": "High"} for pwr, pwrn in powers.items(): append_label(radio_setting_group, pwrn) bounds = ["lower", "center", "upper"] for bound in bounds: name = f"_mem.cal.txp[{bnd}].{pwr}.{bound}" tempval = min_max_def(eval(name), 0, 255, 0) val = RadioSettingValueInteger(0, 255, tempval) radio_setting = RadioSetting(name, bound.capitalize(), val) radio_setting_group.append(radio_setting) # radio_setting_group = RadioSettingGroup("battery_calibration", "Battery") calibration.append(radio_setting_group) for lvl in range(0, 6): name = "_mem.cal.batLvl[" + str(lvl) + "]" temp_val = min_max_def(eval(name), 0, 4999, 4999) val = RadioSettingValueInteger(0, 4999, temp_val) radio_setting = \ RadioSetting(name, "Level " + str(lvl) + (" (voltage calibration)" if lvl == 3 else ""), val) radio_setting_group.append(radio_setting) radio_setting_group = RadioSettingGroup("vox_calibration", "Vox Calibration") calibration.append(radio_setting_group) for lvl in range(0, 10): append_label(radio_setting_group, "Level " + str(lvl + 1)) name = "_mem.cal.vox1Thr[" + str(lvl) + "]" val = RadioSettingValueInteger(0, 65535, eval(name)) radio_setting = RadioSetting(name, "On", val) radio_setting_group.append(radio_setting) name = "_mem.cal.vox0Thr[" + str(lvl) + "]" val = RadioSettingValueInteger(0, 65535, eval(name)) radio_setting = RadioSetting(name, "Off", val) radio_setting_group.append(radio_setting) radio_setting_group = RadioSettingGroup("mic_calibration", "Microphone Sensitivity") calibration.append(radio_setting_group) for lvl in range(0, 5): name = "_mem.cal.micLevel[" + str(lvl) + "]" tempval = min_max_def(eval(name), 0, 31, 31) val = RadioSettingValueInteger(0, 31, tempval) radio_setting = RadioSetting(name, "Level " + str(lvl), val) radio_setting_group.append(radio_setting) radio_setting_group = RadioSettingGroup("other_calibration", "Other") calibration.append(radio_setting_group) name = "_mem.cal.xtalFreqLow" temp_val = min_max_def(eval(name), -1000, 1000, 0) val = RadioSettingValueInteger(-1000, 1000, temp_val) radio_setting = RadioSetting(name, "Xtal Frequency Low", val) radio_setting_group.append(radio_setting) name = "_mem.cal.volumeGain" temp_val = min_max_def(eval(name), 0, 63, 58) val = RadioSettingValueInteger(0, 63, temp_val) radio_setting = RadioSetting(name, "Volume Gain", val) radio_setting_group.append(radio_setting) name = "_mem.cal.dacGain" temp_val = min_max_def(eval(name), 0, 15, 8) val = RadioSettingValueInteger(0, 15, temp_val) radio_setting = RadioSetting(name, "DAC Gain", val) radio_setting_group.append(radio_setting) # ----------------- Help User help_group = RadioSettingGroup("Explain_Display_HELP", "Documentation Display") help_user.append(help_group) append_label(help_group, "=" * 6 + " Documentation Display " + "=" * 50, "=" * 6 + " Location on display " + "=" * 50) append_label(help_group,"Status Line", "First line on the display, on the top of the display" ) append_label(help_group,"(PS) = Power Save", "Status line" ) append_label(help_group,"(S) = Scan active", "Status line" ) append_label(help_group,"(0) = Scan memories that are not on any scan list", "On the right side of the VFO" ) append_label(help_group,"(1) = Scan memories on list 1", "On the right side of the VFO" ) append_label(help_group,"(2) = Scan memories on list 2", "On the right side of the VFO" ) append_label(help_group,"(3) = Scan memories on list 3", "On the right side of the VFO" ) append_label(help_group,"(1 2 3) = Scan ALL memories", "On the right side of the VFO" ) append_label(help_group,"(MO) = Main only, display only one VFO", "Status line" ) append_label(help_group,"(DWR) = Dual RX respond", "Status line" ) append_label(help_group,"(DW) = Main TX dual RX", "Status line" ) append_label(help_group,"(XD) = Cross Band", "Status line" ) append_label(help_group,"(VX) = VOX active", "Status line" ) append_label(help_group,"(CL) = PTT classic mode" , "Status line" ) append_label(help_group,"(OP) = PTT one push mode" , "Status line" ) append_label(help_group,"(F) = Activates the second function of a key" , "Status line" ) append_label(help_group,"" , "" ) append_label(help_group,"(Dark Arrow) = Active VFO" , "On the left side of the VFO" ) append_label(help_group,"(Mxxx) = Memory number M1-M200", "On the left side of the VFO" ) append_label(help_group,"(Fx) = Band number F1-F7 " , "On the left side of the VFO" ) append_label(help_group,"(TX) = VFO used when TX" , "On the left side of the VFO" ) append_label(help_group,"(RX) = Radio receiving" , "On the left side of the VFO" ) append_label(help_group,"" , "" ) append_label(help_group, "=" * 6 + " if (SetGui) is set on CLASSIC " + "=" * 50, "=" * 6 + "=" * 100) append_label(help_group,"(FM,USB,AM) = Reception mode" , "Under each VFO" ) append_label(help_group,"(DC) = RX DCS active" , "Under each VFO" ) append_label(help_group,"(CT) = RX CTCSS active" , "Under each VFO" ) append_label(help_group,"(H) = High TX power" , "Under each VFO" ) append_label(help_group,"(M) = Medium TX power" , "Under each VFO" ) append_label(help_group,"(Lx) = Low TX power, with x = level 1 to 5" , "Under each VFO" ) append_label(help_group,"(W) = Wide BF filter: 12.5kHz (WIDE)" , "Under each VFO" ) append_label(help_group,"(N) = Narrow BF filter: 6.25kHz (NARROW)" , "Under each VFO" ) append_label(help_group,"" , "" ) append_label(help_group, "=" * 6 + " If (SetGui) is set on TINY " + "=" * 50, "=" * 6 + "=" * 100) append_label(help_group,"(FM,USB,AM) = Reception Mode" , "Under each VFO" ) append_label(help_group,"(HIGH) = High TX power" , "Under each VFO" ) append_label(help_group,"(MID) = Medium TX power" , "Under each VFO" ) append_label(help_group,"(LOWx) = Low TX power, with x = level 1 to 5" , "Under each VFO" ) append_label(help_group,"(CT x) = RX CTCSS active, with x = value" , "Under each VFO" ) append_label(help_group,"(DC x) = RX CTCSS active, with x = value" , "Under each VFO" ) append_label(help_group,"(x.xxK) = no incrementation of the frequency" , "Under each VFO" ) append_label(help_group,"(WIDE) = Wide BF filter: 12.5kHz" , "Under each VFO" ) append_label(help_group,"(NAR) = Narrow BF filter: 6.25kHz" , "Under each VFO" ) append_label(help_group,"" , "" ) append_label(help_group, "=" * 6 + "=" * 100, "=" * 6 + "=" * 100) append_label(help_group,"(SQLx) = Squelch level, with x = value from 1 to 9" , "Displayed below each VFO" ) append_label(help_group,"(MONI) = RX monitoring (squelch disabled)" , "Displayed below each VFO" ) help_group = RadioSettingGroup("Explain_Keyboard_HELP", "Keypad documentation" ) help_user.append(help_group) append_label(help_group, "=" * 6 + " Keypad and buttons' function " + "=" * 50, "=" * 6 + " When pressing (F #) before the key " + "=" * 50) append_label(help_group,"(1 BAND) = long press: change the active frequency band (F1 to F7) " , "Same as long press " ) append_label(help_group,"(1 BAND) = short press: digit 1 "," " ) append_label(help_group,"","" ) append_label(help_group,"(2 A/B) = long press: change the active VFO, A(top) / B(bottom) " , "Same as long press " ) append_label(help_group,"(2 A/B) = short press: digit 2 "," " ) append_label(help_group,"","" ) append_label(help_group,"(3 VFO MEM) = long press: toggle between VFO and memory " , "Same as long press " ) append_label(help_group,"(3 VFO MEM) = short press: digit 3 "," " ) append_label(help_group,"","" ) append_label(help_group,"(* SCAN) = long press: if in VFO mode, start a scan ", "Make a scan list from the active channel" ) append_label(help_group,"(* SCAN) = long press, if in memory mode: = switch scan list (1,2, ALL) ", "Make a scan list from the active channel" ) append_label(help_group,"(* SCAN) = short press: DTMF input mode (S) ", "Start CTCSS listening on the current frequency" ) append_label(help_group,"","" ) append_label(help_group,"(4 FC) = long press: start the CTCSS & frequency scan " , "Same as long press " ) append_label(help_group,"(4 FC) = short press: digit 4 "," " ) append_label(help_group,"","" ) append_label(help_group,"(5 NOAA) = long press: if in VFO mode: display ScnRnG " , "Display fagci spectrum analyze " ) append_label(help_group,"(5 NOAA) = long press: if in memory mode, change the scan list " , " ") append_label(help_group,"(5 NOAA) = short press: digit 5 "," " ) append_label(help_group,"","" ) append_label(help_group,"(6 H/M/L) = long press: change the TX power level (High/Medium/Low) of the active VFO " , "Same as long press " ) append_label(help_group,"(6 H/M/L) = short press: digit 6 "," " ) append_label(help_group,"","" ) append_label(help_group,"(0 FM) = long press: FM Broadcast listening ", "Same as long press " ) append_label(help_group,"(0 FM) = short press: digit 0 "," " ) append_label(help_group,"","") append_label(help_group,"(7 VOX) = long press: change voice Activation (VX) " , "Same as long press " ) append_label(help_group,"(7 VOX) = short press: digit 7 "," " ) append_label(help_group,"","" ) append_label(help_group,"(8 R) = long press: reverse (if using a shift) (R) " , "Same as long press ") append_label(help_group,"(8 R) = short press: digit 8 ","Force backlight on/off " ) append_label(help_group,"","Disable backlight timeout (BLTime)") append_label(help_group,"","" ) append_label(help_group,"(9 CALL) = long press: switch current channel to 1-Call channel" , "Same as long press") append_label(help_group,"(9 CALL) = short press: digit 9","Enable backlight timeout (BLTime)" ) append_label(help_group,"","" ) append_label(help_group,"(F #) = long, press: keypad lock/unlock", ) append_label(help_group,"(F #) = short press: activates the secondary button function", ) append_label(help_group,"","" ) append_label(help_group,"(M A) = long press: user programmable button","" ) append_label(help_group,"(M A) = short press: Menu access","" ) append_label(help_group,"","" ) append_label(help_group,"(Arrow UP B) = long press: scroll VFO/MEM upwards","" ) append_label(help_group,"(Arrow UP B) = short press: increase VFO/MEM value ","increase squelch value" ) append_label(help_group,"","" ) append_label(help_group,"(Arrow DOWN C) = long press: scroll VFO/MEM downwards","" ) append_label(help_group,"(Arrow DOWN C) = short press: decrease VFO/MEM value","decrease squelch value" ) append_label(help_group,"","" ) append_label(help_group, "=" * 6 + " side button" + "=" * 50, "=" * 6 + "" + "=" * 50) append_label(help_group,"","" ) append_label(help_group,"(PTT) = long press: transmit on active TX","" ) append_label(help_group,"(PTT) = short press: transmit on active TX","" ) append_label(help_group,"","" ) append_label(help_group,"(.) = long press: user programmable button","" ) append_label(help_group,"(.) = short press, user programmable button","" ) append_label(help_group,"","" ) append_label(help_group,"(..) = long press, user programmable button","" ) append_label(help_group,"(..) = short press, user programmable button","" ) append_label(help_group,"","" ) append_label(help_group, "=" * 6 + " special function " + "=" * 50, "=" * 6 + "" + "=" * 50) append_label(help_group,"","" ) append_label(help_group,"To put the radio in programming MODE firmware","Hold PTT key then switch on the radio, the flashlight will light up" ) append_label(help_group,"","" ) append_label(help_group,"To activate the hidden menu","Hold the PTT key and the button just below it then turn on the radio" ) append_label(help_group,"", "The hidden items are at the end of the regular menu" ) help_group = RadioSettingGroup("How_To_Upload_F4HWN_HELP", "How to upload F4HWN settings") help_user.append(help_group) append_label(help_group,"Special upload need to be done to upload F4HWN firmware settings to the radio", ) append_label(help_group,"since the features of F4HWN's firmware are located in a different memory range.", ) append_label(help_group,"You need to select the box \"Upload F4HWN\", to upload ONLY and ONLY the ", ) append_label(help_group,"section of F4HWN to the radio. Go in menu Radio, Upload to Radio...", ) append_label(help_group,"It will be very fast to upload, then the radio will reboot.", ) append_label(help_group,"After uploading, uncheck the box \"Upload F4HWN\" to be able to upload all other settings", ) append_label(help_group,"of the radio. Go in Radio menu, Upload to Radio... and now all the settings will be sent to the radio ", ) help_group = RadioSettingGroup("Chirp_Language_HELP", "How to change CHIRP language") help_user.append(help_group) append_label(help_group,"It's now possible to change the language directly in CHIRP ", ) append_label(help_group,"Go on the View tab, then Language... You will need to restart chirp to get the new language ", ) # -------- LAYOUT append_label(basic, "=" * 6 + " Start of F4HWN Settings. If this area needs to be uploaded select the upload F4HWN" + "=" * 300, "=" * 300) basic.append(Upload_f4hwn) basic.append(SetPwrSetting) basic.append(SetPttSetting) basic.append(SetTotSetting) basic.append(SetEotSetting) basic.append(contrastSetting) basic.append(SetInvSetting) basic.append(SetLckSetting) basic.append(SetMetSetting) basic.append(SetGuiSetting) basic.append(SetTmrSetting) basic.append(SetOffSetting) append_label(basic, "=" * 6 + " End of F4HWN settings " + "=" * 300, "=" * 300) append_label(basic, "=" * 6 + " General settings " + "=" * 300, "=" * 300) basic.append(squelch_setting) basic.append(rx_mode_setting) basic.append(call_channel_setting) basic.append(auto_keypad_lock_setting) basic.append(tx_t_out_setting) basic.append(bat_save_setting) basic.append(scn_rev_setting) if _mem.BUILD_OPTIONS.ENABLE_NOAA: basic.append(noaa_auto_scan_setting) if _mem.BUILD_OPTIONS.ENABLE_AM_FIX: basic.append(am_fix_setting) append_label(basic, "=" * 6 + " Display settings " + "=" * 300, "=" * 300) basic.append(bat_txt_setting) basic.append(mic_bar_setting) basic.append(ch_disp_setting) basic.append(p_on_msg_setting) basic.append(logo1_setting) basic.append(logo2_setting) append_label(basic, "=" * 6 + " Backlight settings " + "=" * 300, "=" * 300) basic.append(back_lt_setting) basic.append(bl_min_setting) basic.append(bl_max_setting) basic.append(blt_trx_setting) append_label(basic, "=" * 6 + " Audio related settings " + "=" * 300, "=" * 300) if _mem.BUILD_OPTIONS.ENABLE_VOX: basic.append(vox_setting) basic.append(mic_gain_setting) basic.append(beep_setting) basic.append(roger_setting) basic.append(ste_setting) basic.append(rp_ste_setting) if _mem.BUILD_OPTIONS.ENABLE_VOICE: basic.append(voice_setting) if _mem.BUILD_OPTIONS.ENABLE_ALARM: basic.append(alarm_setting) append_label(basic, "=" * 6 + " Radio state " + "=" * 300, "=" * 300) basic.append(freq0_setting) basic.append(freq1_setting) basic.append(tx_vfo_setting) basic.append(keypad_lock_setting) advanced.append(freq_mode_allowed_setting) advanced.append(bat_type_setting) advanced.append(s0_level_setting) advanced.append(s9_level_setting) # if _mem.BUILD_OPTIONS.ENABLE_PWRON_PASSWORD: # advanced.append(pswd_setting) if _mem.BUILD_OPTIONS.ENABLE_DTMF_CALLING: dtmf.append(sep_code_setting) dtmf.append(group_code_setting) dtmf.append(first_code_per_setting) dtmf.append(spec_per_setting) dtmf.append(code_per_setting) dtmf.append(code_int_setting) if _mem.BUILD_OPTIONS.ENABLE_DTMF_CALLING: dtmf.append(ani_id_setting) dtmf.append(up_code_setting) dtmf.append(dw_code_setting) dtmf.append(d_prel_setting) dtmf.append(dtmf_side_tone_setting) if _mem.BUILD_OPTIONS.ENABLE_DTMF_CALLING: dtmf.append(dtmf_resp_setting) dtmf.append(d_hold_setting) dtmf.append(d_live_setting) dtmf.append(perm_kill_setting) dtmf.append(kill_code_setting) dtmf.append(rev_code_setting) dtmf.append(killed_setting) unlock.append(f_lock_setting) # unlock.append(tx200_setting) # unlock.append(tx350_setting) # unlock.append(tx500_setting) unlock.append(en350_setting) # desable by f4hwn # unlock.append(en_scrambler_setting) return top def set_memory(self, memory): """ Store details about a high-level memory to the memory map This is called when a user edits a memory in the UI """ number = memory.number-1 att_num = number if number < 200 else 200 + int((number - 200) / 2) # Get a low-level memory object mapped to the image _mem_chan = self._memobj.channel[number] _mem_attr = self._memobj.ch_attr[att_num] _mem_attr.is_scanlistx = 0x7 _mem_attr.compander = 0 _mem_attr.band = 0x7 # empty memory if memory.empty: _mem_chan.set_raw("\xFF" * 16) if number < 200: _mem_chname = self._memobj.channelname[number] _mem_chname.set_raw("\xFF" * 16) return memory # find band band = self._find_band(memory.freq) # mode tmp_mode = self.get_features().valid_modes.index(memory.mode) _mem_chan.modulation = tmp_mode / 2 _mem_chan.bandwidth = tmp_mode % 2 if memory.mode == "USB": _mem_chan.bandwidth = 1 # narrow # frequency/offset _mem_chan.freq = memory.freq/10 _mem_chan.offset = memory.offset/10 if memory.duplex == "": _mem_chan.offset = 0 _mem_chan.offsetDir = 0 elif memory.duplex == '-': _mem_chan.offsetDir = FLAGS1_OFFSET_MINUS elif memory.duplex == '+': _mem_chan.offsetDir = FLAGS1_OFFSET_PLUS elif memory.duplex == 'off': # we fake tx disable by setting the tx freq to 0 MHz _mem_chan.offsetDir = FLAGS1_OFFSET_MINUS _mem_chan.offset = _mem_chan.freq # set band # _mem_attr.is_free = 0 _mem_attr.band = band # channels >200 are the 14 VFO chanells and don't have names if number < 200: _mem_chname = self._memobj.channelname[number] tag = memory.name.ljust(10) + "\x00"*6 _mem_chname.name = tag # Store the alpha tag # tone data self._set_tone(memory, _mem_chan) # step _mem_chan.step = STEPS.index(memory.tuning_step) # tx power if str(memory.power) == str(UVK5_POWER_LEVELS[7]): _mem_chan.txpower = POWER_HIGH elif str(memory.power) == str(UVK5_POWER_LEVELS[6]): _mem_chan.txpower = POWER_MEDIUM elif str(memory.power) == str(UVK5_POWER_LEVELS[5]): _mem_chan.txpower = POWER_LOW5 elif str(memory.power) == str(UVK5_POWER_LEVELS[4]): _mem_chan.txpower = POWER_LOW4 elif str(memory.power) == str(UVK5_POWER_LEVELS[3]): _mem_chan.txpower = POWER_LOW3 elif str(memory.power) == str(UVK5_POWER_LEVELS[2]): _mem_chan.txpower = POWER_LOW2 elif str(memory.power) == str(UVK5_POWER_LEVELS[1]): _mem_chan.txpower = POWER_LOW1 else: _mem_chan.txpower = POWER_USER # -------- EXTRA SETTINGS def get_setting(name, def_val): if name in memory.extra: return int(memory.extra[name].value) return def_val _mem_chan.txLock = get_setting("txLock", 0) _mem_chan.busyChLockout = get_setting("busyChLockout", False) _mem_chan.dtmf_pttid = get_setting("pttid", 0) _mem_chan.freq_reverse = get_setting("frev", False) _mem_chan.dtmf_decode = get_setting("dtmfdecode", False) _mem_chan.scrambler = get_setting("scrambler", 0) _mem_attr.compander = get_setting("compander", 0) if number < 200: tmp_val = get_setting("scanlists", 0) _mem_attr.is_scanlistx = tmp_val return memory